To Transfer A Call; To Place A Call On Hold; To Place A Call On Exclusive Hold - NEC DT310 User Manual

To Transfer a Call

After conversing, ask party to hold.
Press Transfer. Receive interrupted dial tone.
XFR
4:26 PM TUE 12 FEB 2008
Dial destination station's extension, hang up or wait
for answer.

To Place a Call on Hold

Press the HOLD key. Held line wink flashes.
HLD
4:26 PM TUE 12 FEB 2008
If held line appears on other stations, the
Note:
associated LED flashes red slowly.
To Retrieve:
Lift handset or press Speaker key.
Press held line. User handset to converse.
Any station with this line appearance can
Note:
retrieve the call.
Transferred station
or trunk number
2001
Held station
number
2001
If Unanswered:
After preprogrammed time, Automatic Recall is
initiated.
Visual and audible signal (rapid flash and ring
burst) is sent to station that placed call on hold.
Note: Hold shows as a flashing green LED on your
phone. The same line on other phones shows
as flashing red LED. Recall shows as a
flashing green LED on your phone and
flashing red LED on other phones with the
same line.

To Place a Call on Exclusive Hold

To Initiate:
Press the HOLD key twice. Line appearance
indicates interrupted wink.
EHD
4:26 PM
If held line appears on other stations, LED
Note:
remains steadily lit red.
35
Held station
number
2001
TUE 12 FEB 2008