Table of Contents
Advertisement
12
Daily use
The meat probe must stay in the meat and in the meat probe socket during the cooking
process. While the appliance calculates the provisional end time, the display shows a square
that flashes.
7. When the meat reaches set core temperature, an audible signal sounds and the appli-
ance switches off automatically.
Use any button to stop the signal.
8. Remove the meat probe plug from the socket and remove the meat from the oven.
WARNING!
The meat probe is hot! Risk of burns! Be careful when you remove the tip and plug of the
meat probe.
9. Switch off appliance.
For meat programmes with the meat probe, refer to automatic programmes.
Changing the core temperature
1. Use
again and again until the display shows MEATPROBE.
2. Use
or
Automatic programmes
These 3 automatic programmes give optimum settings for each type of meat or other
recipes:
• Meat programmes with weight input (OVEN FUNCTIONS menu)
• Meat programmes with meat probe (OVEN FUNCTIONS menu)
• Automatic recipes (Options menu)
Meat programmes with weight input
If you set the weight of the meat, the appliance calculates the roasting time.
1. Use
gramme.
The weight flashes.
2. While the weight flashes, use
to set the weight of the meat.
The setting changes in steps of 0.1 kg (for
POULTRY in steps of 0.2 kg).
The display shows the length of the programme. The time counts down.
If you do not change the weight in less than 5 seconds, the meat programme starts. To
change the weight after the programme starts, use
programme starts.
3. For POULTRY meat programme turn the food when you hear an acoustic signal and the
display shows TURN-OVER MEAT.
When the meat programme is completed, you will hear an acoustic signal.
Meat programmes with meat probe
When you install the meat probe, you can find more meat programmes in the OVEN FUNC-
TIONS menu.
to change the core temperature.
or
to set the meat pro-
POULTRY
or
in less than 2 minutes after the
2,5 KG
Advertisement
Table of Contents
