Barcode Sizes - Xerox 4112 User Manual

Barcode Settings
Character set
Character
HEX
notation
9 39

Barcode sizes

The table below lists formulae for calculating the approximate dimensions of printed barcodes.
The dimensions of the barcode printed may vary, even when using the same program,
depending on conditions such as the characteristics and resolution of the printer used, paper
quality, and so forth. The dimensions derived from the formulae in this table are not guaranteed
to be the actual dimensions of the printed barcodes. Use this table as a reference when
estimating the size of printed barcodes.
Barcodes
type
JAN (standard)
JAN (short version)
Code 39
NW7
Code 128
ITF
(without bearer bar)
ITF
(with bearer bar)
3-10
Character
ASCII
notation
9
Width
P × 0.502
Side margins not included.
P × 0.354
Side margins not included.
P × (C + 2) × 0.106
Inter character gap of the left and right sides
not included.
"C" includes the checkdigit.
P × (C1 × 0.132 + C2 × 0.148 − 0.026)
Inter character gap of the left and right sides
not included.
"C1" and "C2" include the checkdigit.
P × (C × 0.081 + 0.096)
Formula for CODE C.
P × ((C/2 × 0.175) +0.093)
Quiet zone not included.
"C" includes the checkdigit.
P × ((C/2 × 0.137) + 0.323)
Bearer bar and quiet zone included.
"C" includes the checkdigit.
Xerox 4112/4127 Copier/Printer
Character set
HEX notation ASCII notation
Formula
Height
P × 0.352
Indicates the height of
the guard bar.
P × 0.352
Indicates the height of
the guard bar.
P × 0.352
P × 0.352
P × 0.352
P × 0.352
P × 0.352
Bearer bar included.
PostScript User Guide