Using The Super Control Panel - Olympus E-420 Instruction Manual

Using the super control panel

Select an item on the super control panel and change the setting.
1
Press the INFO button to display the super control
panel on the LCD monitor.
• Press the INFO button again to turn off the super control
panel.
• Press the i button during live view to display the super
1
control panel.
2008. 08.16
2
Press the i button.
• The cursor on the super control panel
lights.
ISO
Cursor
4
Use the control dial to change the setting.
• Press the i button to display the direct menu indicated at
the position of the cursor. You can also use the direct
menu to change the setting. After changing the setting,
press the i button to confirm your setting. If no operation
is made within a few seconds, your setting is confirmed
and the super control panel is displayed.
For details on the functions that can be set with the super control panel, refer to "Super
control panel" (gP. 7).
28
EN
AF
OFF
arge
Normal
OFF
arge
Normal
The name of the selected
function is displayed.
INFO button
3
Use p to move the cursor to the
function you want to set.
METERING
arge
Normal
METERING
SELECT
Control dial
i button
p Arrow pad
OFF
GO
Direct menu