Using The Direct Buttons - Olympus E-420 Instruction Manual

Using the direct buttons

1
Press the button for the function you want to set.
• The direct menu is displayed.
e.g.) Setting Sequential / Self-timer /
Remote control shooting
SELECT
Direct menu
2
Turn the control dial to change the setting.
• Press the i button to confirm your setting. Or if you do not operate the control dial within a few
seconds, your setting will be confirmed and the super control panel screen will be restored.
List of direct buttons
The functions assigned to buttons are as shown below.
No. Direct buttons
Remote control / Self-timer /
< / Y / j
1
Sequential shooting button
F
2 Exposure compensation button
u
3 Live view button
#
4 Flash button
F Exposure compensation button
2
+ +
#
4
Flash button
TIPS
To assign other functions so they can be set with direct buttons:
j You can also assign frequently used functions to the b and < / Y / j buttons.
g"7 FUNCTION" (P. 90), "j FUNCTION" (P. 90)
1
GO
Remote control / Self-timer /
Sequential shooting
Exposure compensation
Turns live view on or off
Pops up the flash and sets flash
mode
Flash intensity control
Control dial
4
Function
1
2
3
Ref. page
P. 58 – 61
P. 51
P. 37
P. 70
P. 74
27
EN