GE NX-148E User Manual page 21

OPERATING INDIVIDUAL AREAS IN THE MULTI-PARTITION MODE
Enter a code that is a valid arm/disarm code for the area you wish to operate. The
following display will appear on the LCD screen.
12-4—78
--3-56--
To toggle between the armed and disarmed states of an individual area, press [r]
[Area number].
To operate an individual area, enter the number of the partition you wish to operate.
The LCD keypad will now operate as a single area keypad. All keys and functions
entered will affect this individual partition only. The lights and display represent the
status of that partition only. The word "System" will be replaced with the word "Area
#". The following is an example of this feature. To exit this screen, press [#].
Area 5 Ready
Type code to arm
SILENCING ALARMS IN THE MULTI-PARTITION MODE
If the keypad is sounding an alarm or the siren is running, it can be silenced by
entering a code with the authority for the area(s) that are in alarm. NOTE: The
[EXIT], [BYPASS], and [STAY] keys will only work if an individual partition is selected.
NX-148E LCD Keypad
Disarm º
º
Arm
Only the areas authorized by this code will
appear.
Area 5 is selected and Area 5 is ready to arm.
To exit the individual partition mode, enter [#]-
[#].
19