Table of Contents
Advertisement
2. CONTROLS/COMMANDES/REGLER/CONTROLLI/
REGLAARS/CONTROLES/KONTROLLER/CONTROLOS
[ SRC ]
Sensor/Capteur/Sensor/
Sensore/Sensor/Sensor/
Sensor/Sensor
[ BAND ]
Note
: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
*The control panel can be detached to prevent theft. For details, see the pages entitled "7. DCP".
Remarque : Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
*Le panneau de commande peut être détaché de l'unité pour éviter tout vol. Pour plus d'informations,
reportez-vous au chapitre "7. PANNEAU DE COMMANDE AMOVIBLE (DCP)".
Hinweis
: Breiten Sie diese Seite aus, und beziehen Sie sich beim Lesen der einzelnen Kapitel auf die Diagramme
auf der Vorderseite.
*Das Bedienfeld kann zum Diebstahlschutz abgenommen werden. Details finden Sie auf den Seiten mit dem
Titel "7. ABNEHMBARES BEDIENFELD (DCP)".
Nota
: Aprire la pagina e fare riferimento alle illustrazioni a fronte durante la lettura di ciascun capitolo.
*Il pannello di controllo può essere rimosso per evitarne il furto. Per ulteriori informazioni, consultare la sezione
"7. FRONTALINO ESTRAIBILE (DCP)".
Opmerking : Vouw deze pagina uit en raadpleeg de diagrammen aan de voorzijde tijdens het doornemen van de hoofdstukken.
*Het bedieningspaneel kan worden afgenomen om diefstal te voorkomen. Zie de pagina's met de titel
"7. AFNEEMBAAR BEDIENINGSPANEEL (DCP)" voor meer informatie.
Nota
: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
*Puede extraer el panel de control para evitar que lo roben. Para obtener más información, consulte las
páginas del apartado "7. PANEL DE CONTROL EXTRAÍBLE (DCP)".
Anmärkning: Kom ihåg att vika ut den här sidan och hänvisa till diagrammen när du läser varje kapitel.
*Kontrollpanelen kan tas bort för att förhindra stöld. Mer information finns på sidorna
"7. LÖSTAGBAR KONTROLLPANEL (DCP)".
Nota
: Ao ler cada capítulo, desdobre esta página e consulte os diagramas.
*Pode remover o painel de controlo para evitar que o roubem. Para obter mais informações, consulte as
páginas "7. PAINEL DE CONTROLO AMOVIVEL (DCP)".
5
[ VOICE ]
[ MAP ]
[ MENU ]
[
]
[ TA ]
[ MONI ]
[ ADJ ]
3. NOMENCLATURE
Names of Buttons
Note:
• Be sure to read this chapter while referring to the
front diagrams for chapter "2.CONTROLS" on
page 5(unfold).
[E], [e] buttons
• Use these buttons to increase/decrease the
volume.
[p] button
• Press this button to enter the play pause mode
in the DVD PLAYER/iPod/changer modes.
Press the button again to resume playback.
• Keep pressing this button more than 1 second to mute
the sound in the DVD PLAYER/iPod/changer modes.
• Press this button to mute the sound in the
TUNER/TV/VISUAL/DAB modes.
[SRC] button
• Press this button to turn on the power. Keep pressing
this button more than 1 second to turn off the power.
• When the liquid crystal panel is closed, press this button
to change to the next mode such as TUNER mode.
• When the liquid crystal panel is open, press
this button to display the Source menu screen
to switch the mode.
[R], [F] buttons
• Use these buttons to change to the previous/next
preset station in the TUNER/TV/DAB modes.
• Use these buttons to select a track in the CD, Video
CD, MP3/WMA, iPod and CD changer modes.
• Use these buttons to select a chapter in the
DVD video and DVD changer modes.
[BAND] button
• Press this button to switch the receiving
bands for TUNER/TV/DAB modes. Keep
pressing this button more than 1 second to
switch the Seek/Manual tuning modes.
• Use this button to move to the first track in the
CD, Video CD and iPod modes, or the first
chapter in the DVD video mode.
• Use this button to move to the next folder in
the MP3/WMA mode.
• Use this button to switch to the next disc in the
changer modes.
• Keep pressing this button more than 1 second
to play all tracks in the iPod mode.
*1
[VOICE] button
• Press this button to show the Voice screen of
the navigation system in the Navigation
mode.
• Pressing this button in the audio/visual modes
changes to the Navigation mode and changes the
navigation system to the voice input mode.
6
*1
[MAP] button
• Press this button to show the Map screen of
the current location in the Navigation mode.
• Pressing this button in the audio/visual modes
changes to the Navigation mode.
• Pressing this button switches the liquid crystal
panel to a Visual input screen to lock the
monitor (To enable this function, go to the
GENERAL menu (within the ADJUST menu),
and touch the [CONNECT] key, and select the
desired item other than "NONE").
*1
[MENU] button
• Pressing this button in the Navigation mode
shows the Menu screen of the Navigation
system.
• When the menu screen of a DVD video/Video
CD is displayed, pressing this button displays
the Key Pad on the screen. When the other
screen than the menu screen is displayed,
keep pressing this button more than 1 second
to display the Key Pad.
*1
[ADJ] button
• Press this button to enter/exit the ADJUST
mode to change the settings.
*1
[MONI] button
• Press this button to enter/exit the Monitor
Adjust mode.
• Keep pressing this button more than 1 second to
turn off the back light of the liquid crystal panel.
[TA] button
• Press this button to turn on/off the TA (Traffic
Announcement) standby mode.
• Keep pressing this button more than 1 second
in the DAB mode to turn on/off the Information
standby mode.
[o] (EJECT) button
• Use this button to eject the disc set in this unit.
[P] (OPEN) button
• Use this button to open/close the liquid crystal panel.
• Keep pressing this button more than 2
seconds so that the liquid crystal panel is
positioned horizontally when the liquid crystal
panel is open (Air Conditioner Operation
mode).
• When the liquid crystal panel closed, keep
pressing this button more than 5 seconds to
perform the panel calibration function to memorize
the maximum angle of the liquid crystal panel.
Note:
*1: This button does not work when the liquid
crystal panel is closed.
Advertisement
Table of Contents
