Table of Contents
Advertisement
Basic Operations
Switching CONNECT (connect)
Make the following settings when an external
device is connected to the Visual terminal.
Note:
• This function is not available when the Clarion
navigation system (NAX963HD) is connected.
• When the navigation system is connected, use the
monitor lock function. Locking the monitor locks
the screen size in F.WIDE mode (full wide), and
the VTR system to NTSC if the CONNECT item is
set to [COMPOSITE].
RGB :
Select when the Clarion navigation system
(NAX943DV, NAX9500E) is connected.
COMPOSITE :
Select when a navigation system of the other
manufacturer is connected.
OTHERS :
Select for external devices other than a
navigation system.
NONE :
Select when no external device is connected.
• The factory default setting is "NONE".
3-1. Touch the []] key of the CONNECT item to
display the CONNECT screen.
3-2. Touch the [RGB], [COMPOSITE],
[OTHERS] or [NONE] to set the function.
Setting the BEEP
The sound heard when you make operations is
called "beep". The unit can be set up so that it
does not produce this beep sound.
• The factory default setting is "BEEP ON".
3-1. Touch the [ON] or [OFF] key of the BEEP
item to turn the function on or off.
Setting the Blink LED
You can set the unit to blink the LED indication
when the DCP (Detachable Control Panel) is
removed.
3-1. Touch the [ON] or [OFF] key of the BLINK
LED item to turn the function on or off (The
factory default setting is "OFF").
Mobile phone interrupt setting
When you connect your mobile phone to this unit
using a separately sold cable, you can listen to
your telephone calls on your car speakers.
• The factory default setting is "OFF".
3-1. Touch the []] key to display the next menu
screen.
3-2. Touch the [ON], [OFF] or [MUTE] key of the
TEL SWITCH item to set to "ON", "OFF" or
"MUTE".
ON:
You can listen to your telephone calls from
the speakers connected to this unit.
* When listening to your calls on your car
speakers, you can adjust the volume using
the [E]/[e] buttons.
OFF:
This unit continues normal operation even
when you use the mobile phone.
MUTE:
The sound from this unit is muted during
telephone calls.
• This function is not compatible with all
mobile telephones. Contact your local
authorized Clarion dealer for information
on proper installation and compatibility.
Note:
• When you set this function to "OFF", disconnect
the mobile phone from the cable or turn off the
power of the mobile phone.
Changing the output speaker for the
mobile phone
• The factory default setting is "RIGHT".
• To output the telephone calls, set the above
TEL SWITCH item to "ON".
3-1. Touch the []] key to display the next menu
screen.
3-2. Touch the [LEFT] or [RIGHT] key of the TEL
SP item to set to "LEFT" or "RIGHT".
LEFT:
Telephone calls are heard from the left
speaker connected to this unit.
RIGHT:
Telephone calls are heard from the right
speaker connected to this unit.
Note:
• During mobile phone interrupts, setting this
function is disabled.
29
Advertisement
Table of Contents
