BEC 7300N User Manual page 71

PPPoE (EWAN)
PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services
using PPP.
Line Speed: Set the downstream and upstream of your connection in kilobytes per
second. The connection speed is used by QoS settings.
Username: Enter the username provided by your ISP. You can input up to 128
alphanumeric characters (case sensitive). This is in the format of "username@ispname"
instead of simply "username".
Password: Enter the password provided by your ISP. You can input up to 128
alphanumeric characters (case sensitive).
Service Name: Enter a name for this connection.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the
Internet through a single IP account, sharing a single IP address. If users on your LAN have
public IP addresses and can access the Internet directly, the NAT function can be disabled.
IP Address: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP
address from your ISP.
Auth. Protocol: Default is Auto. Your ISP advises on using Chap or Pap.
Obtain DNS Automatically: Select this check box to use DNS.
Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS
servers are passed to the DHCP clients along with the IP address and the subnet mask.
MAC Spoofing: Select Enable and enter a MAC address that will temporarily change
your router's MAC address to the one you have specified in this field. Leave it as Disabled if
you do not wish to change the MAC address of your router.
71