Adsl Status - BEC 7300N User Manual

5.1.1 ADSL Status

DSP Firmware Version: DSP code version
DMT Status: Current DMT Status
Operational Mode: To show the state when user select "AUTO" on connect mode.
Upstream: Upstream rate.
Downstream: Downstream rate.
SNR Margin (Upstream): This is noise margin in upstream.
SNR Margin (Downstream): This is noise margin in downstream.
Line Attenuation (Upstream): This is attenuation of signal in upstream.
Line Attenuation (Downstream): This is attenuation of signal in downstream.
ADSL Mode: There are four modes "Open Annex Type and Follow DSLAM's
Setting", "Annex A", "Annex L", "Annex M" and "Annex J" that user can select for this
connection.
Modulator: There are seven modes "AUTO","ADSL
Multimode","ADSL2", "ADSL2+","G.Lite", "T1.413" and "G.DMT" that user can select for
this connection.
37