3.Select the Obtain an IP address from a
DHCP server radio button and click OK.
3.2 Factory Default Settings
Before configuring the BEC 7300N router, you need to know the following default settings.
Web Interface: (Username and Password)
Username: admin
Password: admin
The default username and password are "admin" and "admin" respectively.
If you ever forget the username/password to login to the router, you
may press the RESET button up to 6 seconds then release it to restore
the factory default settings.
Caution: After pressing the RESET button for more than 6 seconds then release it, to
Attention
Attention
be sure you power cycle the device again.
20