Toshiba E-studio2555c Troubleshooting Manual page 62

1 TROUBLESHOOTING FOR THE HARDWARE
Fit the staple cartridge into the stapler.
5
When fitting the staple cartridge, hold the green-labeled portion of the
bracket securely so that the bracket will not move.
Insert the cartridge until it is caught by the latch and fixed with a click.
Close the front cover of the finisher.
6
If the message "Check staple cartridge" remains, repeat the procedure above from steps 1 to 6.
 Inner Finisher
Lift up the control panel and then open the front cover
1
of the finisher.
While holding the green lever, move the finisher to the
2
left until it stops.
Open the Hole Punch Unit while pushing the green
3
lever.
60 Refilling With Staples
1
2
2
1
2
1