Toshiba E-studio2555c Troubleshooting Manual page 48

1 TROUBLESHOOTING FOR THE HARDWARE
Holding the knob, raise the guide, and return it to its
5
original position.
Remove the staples fallen between the staple
6
cartridge and the staple case or the ones in the staple
receiver.
Fit the staple cartridge into the stapler.
7
When fitting the staple cartridge, hold the green-labeled portion of the
bracket securely so that the bracket will not move.
Insert the cartridge until it is caught by the latch and fixed with a click.
Close the front cover of the finisher.
8
 Inner Finisher
Lift up the control panel and then open the front cover
1
of the finisher.
46 Clearing a Staple Jam
1
2