Canceling A Print Job From The Printer Control Panel; Clearing Jams; Avoiding Jams; Canceling A Print Job From The Computer - Lexmark MS710 Quick Reference Manual

2 From the printer control panel, select the document you want to
print.
3
Press the left or right arrow button to specify the number of copies
for printing, and then press .
Notes:
•
Do not remove the flash drive from the USB port until the
document has finished printing.
• If you leave the flash drive in the printer after leaving the
initial USB menu screen, then access held jobs from the
printer control panel to print files from the flash drive.
Canceling a print job
Canceling a print job from the printer control
panel
From the printer control panel, press >

Canceling a print job from the computer

For Windows users
1
Open the printers folder.
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type control printers > OK
In Windows 7 or earlier
a
Click
b
In the Start Search or Run dialog, type control printers.
c
Press Enter, or click OK.
2
Double‑click the printer icon.
3
Select the print job you want to cancel.
4
Click Delete.
For Macintosh users
1 From the Apple menu, navigate to either of the following:
• System Preferences > Print & Scan > select your printer > Open
Print Queue
•
System Preferences > Print & Fax > select your printer > Open
Print Queue
2
From the printer window, select the print job you want to cancel,
and then delete it.

Clearing jams

Carefully select paper and specialty media, and then load them
properly to avoid most jams. For more information, see "Avoiding
jams" on page 12. If jams occur, then follow the steps outlined in this
chapter.
Note: Jam recovery is set to Auto by default. The printer reprints
jammed pages unless the memory required to hold the pages is
needed for other printer tasks.

Avoiding jams

.
Load paper properly
• Make sure paper lies flat in the tray.
or click Start, and then click Run.
12
Correct loading of paper Incorrect loading of paper
• Do not remove a tray while the printer is printing.
• Do not load a tray while the printer is printing. Load it before
printing, or wait for a prompt to load it.
•
Do not load too much paper. Make sure the stack height is below
the maximum paper fill indicator.
• Do not slide the paper into the tray. Load paper as shown in the
illustration.