Weber Platinum I 2200 LP Owner's Manual page 27

d) Unlatch the Spider Stopper Guards and remove.
Figure 9.
e) Remove the manifold bracket and unscrew the two
wing nuts that hold the manifold to the cooking box.
Pull the manifold and valve assembly out of the
burners and carefully set it down. Figure 10.
Figure 10
f) Slide the burner assembly out from under the guide
screw and washer in the corners of the cooking box.
Figure 11.
Guide screw
Figure 11
Figure 9
View from behind
cooking box
Wing nuts
g) Lift and twist the burner assembly slightly, to separate
the crossover tube from the burners. Figure 12.
Remove the burners from the cooking box.
Crossover tube
h) To reinstall burners, reverse steps c) through g).
CAUTION: The burner openings must be positioned
properly over the valve orifices. Figure 13a.
Check proper assembly before fastening manifold in place.
Figure 13b.
(a)
Burner
(b)
27 27
Figure 12
Valve
Figure 13