Rule Configuration - ZyXEL Communications P-662H-61 User Manual

Table 120 Bandwidth Management: Rule Setup (continued)
LABEL
Priority
Bandwidtht (kbps)
Add
#
Active
Rule Name
Destination Port
Priority
Bandwidtht (kbps)
Modify
Apply
Cancel

19.8.1 Rule Configuration

Click the Edit icon or select User Defined from the Service drop-down list in the Rule Setup
screen to configure a bandwidth management rule. Use bandwidth rules to allocate specific
amounts of bandwidth capacity (bandwidth budgets) to specific applications and/or subnets.
P-662H/HW-D Series User's Guide
DESCRIPTION
Select a priority from the drop down list box. Choose High, Mid or Low.
Specify the maximum bandwidth allowed for the rule in kbps. The
recommendation is a setting between 20 kbps and 20000 kbps for an individual
rule.
Click this button to add a rule to the following table.
This is the number of an individual bandwidth management rule.
This displays whether the rule is enabled. Select this check box to have the
ZyXEL Device apply this bandwidth management rule.
Enable a bandwidth management rule to give traffic that matches the rule priority
over traffic that does not match the rule.
Enabling a bandwidth management rule also allows you to control the maximum
amounts of bandwidth that can be used by traffic that matches the rule.
This is the name of the rule.
This is the port number of the destination. 0 means any destination port.
This is the priority of this rule.
This is the maximum bandwidth allowed for the rule in kbps.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to remove an existing rule.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 19 Bandwidth Management
283