ZyXEL Communications P-660RU-T1 v3 User Manual page 65

Table 13 Interface Setup > Internet (Static IP) (continued)
LABEL
Dynamic Route
Direction
Multicast
MAC Spoofing
P-660RU-Tx v3 User's Guide
DESCRIPTION
RIP (Routing Information Protocol) allows a router to exchange routing
information with other routers.
Select the RIP version from RIP1, RIP2-B and RIP2-M.
Use this field to control how much routing information the ZyXEL Device sends
and receives on the subnet.
Select the RIP direction from None, Both, IN Only and OUT Only.
Multicast packets are sent to a group of computers on the LAN and are an
alternative to unicast packets (packets sent to one computer) and broadcast
packets (packets sent to every computer).
IGMP is a network-layer protocol used to establish membership in a multicast
group. The ZyXEL Device supports IGMP v1, IGMP v2 and IGMP v3. Select
Disabled to turn off the feature.
This field is only available when you select 1483 Bridged IP LLC or 1483
Bridged IP VC-Mux in the Encapsulation field.
Use this field to alter the MAC address so that the PVCs on the ZyXEL Device
can establish connections to the network.
Chapter 7 Internet Setup
65