Adjusting Your Hard Disk Setting - AOpen i915Gm-IE User Manual

Adjusting your Hard Disk Setting

Except its original 1 set of parallel IDE, this motherboard supports the latest serial
ATA hard disk. If you are unable to find your newly installed serial ATA hard disks
on your operating system after having them installed, the problem may lie in the
BIOS setting. You can simply adjust BIOS settings to have them work properly.
After installing your hard disks properly, you can directly go to BIOS setting
screen for adjustment. Simply pressing "Integrated Peripherals OnChip
IDE Device On-Chip Serial ATA" to choose your preferable mode. If you
have no intention of changing its original setting, the default would be Auto.
19