Dimplex DFB8842 Owner's Manual page 15

Hide thumbs Also See for DFB8842:
Table of Contents

Advertisement

Maintenance
Figure 7
Upper Light Bracket
Lower Bulbs
the Log Set contains LED's and
wires.
Lower Light Bulb Requirements
Quantity of three clear chande-
lier or candelabra bulbs with an
E-12 (small) socket base, 60 Watt
rating. Example: GE 60BC or
Philips 60CTC. Do not exceed
60 Watts per bulb.
To access the lower light bulb
area:
CAUTION: Allow at least five
minutes for light bulbs and heater
to cool off before touching bulbs
to avoid accidental burning of
skin.
1. Slide fireplace out of mantel.
2. Remove four Phillips screws
Upper Bulbs
Log Set Assembly
from right side of trim (Figure
7).
3. Remove trim.
4. Slide glass to right side of fire-
place to remove (Figure 7).
5. Pull the front edge of the plas-
tic Log Set or plastic grate up
and forward until the rear tab
releases from the ledge locat-
ed at the bottom of the partially
reflective glass (Figure 8).
!
IMPORTANT: Only handle
the Log Set Assembly by the
Ember Bed or plastic grate.
!
NOTE: Log Set Assembly fits
tightly into firebox, some force
may be necessary to remove.
6. Set Log Set Assembly in front
Front Glass
Trim
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents