Dimplex DFB8842 Owner's Manual page 11

Operation
replace the batteries promptly,
to maintain full functionality of
the remote/fireplace. The remote
control has a battery backup time
of only several hours.
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or Retailer for recycling
advice in your area.
Initializing/ Reprogramming the
Remote Control
1. Plug cord into 120 Volt wall
outlet.
2. Ensure the Main On/Off Switch
of the fireplace (Figure 3A) is
in the On
3. Set the 3 Position Switch (Fig-
ure 3B) to the Remote position
(right position).
4. Press and hold the Initializa-
tion Button on the unit (Figure
3C).
5. While holding the Initialization
Button, press the Flame/Heat
On/Off button or the Puri-
fire™ On/Off
remote control (Figure 5).
6. Release the Initialization But-
ton on the unit.
7. Press the Flame/Heat On/Off
button to turn the Flame/
position.
button on the
Heat function on or press the
Purifire™ On/Off button
turn the Purifire™ function on.
Remote Control Functions
(All letter references are to Figure 5)
B. Set Temperature
Press H button to turn fireplace
on.
Press J to raise thermostat, or I to
lower the thermostat.
Press both J and I to change °F
to °C.
C. Light Dimmer Control
While the fireplace is running,
repeatedly press the L or K but-
ton to increase or decrease the
brightness of the upper lights.
D. Flame Speed Control
While the fireplace is running,
press the N button to increase the
speed of the flame or press the
M to decrease the speed of the
flame.
E. Sleep Timer
The Sleep Timer automatically
shuts off the fireplace after a pre-
set time (from 30 minutes to 8
hours).
During fireplace operation, to
set the sleep timer press the P
to
11