Dimplex DFB8842 Owner's Manual page 13

Operation
Purifire™ function off.
H. Flame & Heat On/Off Button
Press the H button to turn the
Flame/Heat function on. When
B is higher then A the heat will
come on. To turn the heat off,
lower the B so that it's setting is
lower then the A. The default tem-
perature setting is 72°F (22°C).
!
NOTE: When using the
remote control the heater runs
on a thermostat. Press the
J or I buttons to adjust the
set temperature. Once the
desired set temperature is
reached the heater will turn off.
The heater will cycle on and
off to maintain the desired set
temperature.
Disable Heat
If desired, depending on the sea-
son, the heater on the unit can be
disabled. The unit will operate in
the same fashion, with remainder
of the controls.
To Disable - Press J and O at the
same time. The temperature
setting on the remote will no
longer be visible.
!
NOTE: The heat will not work
in manual controls either.
To Enable - Press J and Q at the
same time. The temperature
setting will now be visible
again.
Child Lock
(Figure 6)
1. Depress tab on the battery
cover on the back of the re-
mote control and remove the
battery cover.
2. Move Child Lock tab to the
right to lock the remote control.
3. Move Child Lock tab back to
the left to unlock the remote
control.
4. Replace the battery cover.
!
NOTE: To temporarily unlock
the remote control press (in
order) I then J then K.
When the remote control's back-
light is illuminated the Child Lock
is bypassed. When the backlight
is off the Child Lock is re-activat-
ed.
Figure 6
Child Lock
Unlocked
Switch
Locked
13