Fireplace Installation; Site Selection - Dimplex BLF74 Owner's Manual

Fireplace Installation

Site Selection

Review and consider all of the
following conditions before instal-
lation:
• Dimensions of the unit: 74.1 in.
(1883 mm) x 19.4 in. (494 mm)
• Unit requires a minimum of 3
wall studs in order to ensure a
secure installation
There are two possible mounting
methods:
• Surface mount (pg. 11);
• Flush mount (pg. 12).
!
NOTE: If the desired fireplace
location is on the interior of an
exterior wall the unit should only
be surface mounted. If a in-wall or
flush mount look is desired build
the interior wall out into the room.
!
NOTE: A dedicated, properly
fused 15 Amp circuit is re-
quired, rated for the appropri-
ate voltage (120V, 240V).
WARNING: Construction and
electrical outlet wiring must
comply with local building
codes and other applicable
regulations to reduce the risk
of fire, electric shock and injury
to persons.
WARNING: To reduce the risk
of fire, do not store or use gaso-
8
line or other flammable vapors or
liquids in the vicinity of the heater.
1. Select a location that is not
susceptible to moisture and
is away from drapes, furniture
and high traffic.
2. Unpack the fireplace, front
glass and hardware from the
box and remove all packaging
materials before installation.
3. Store the fireplace in a safe,
dry and dust free location until
Figure 2
Screws
Electrical Cover Bracket
Figure 3
www.dimplex.com