Wiring - Montigo EP28-5 Installation & Operation Manual

EP8-5 Modular Series Fireplace
Gas Control and Pilot Wiring
Honeywell (Q3450)
Pilot Assembly
Pilot Electrical
Harness Connector
Honeywell Gas
Control (SV9501M)
Gas Control
Connector
Fan Plug
Receptacle
Grnd Screw
Limit Wall
Switch
Switch
Figure 10. Wiring for the EP28 -I Models with Honeywell gas control
and pilot.
Page 8

Wiring

EP28-I
Junction Box Cover
Fuse
Junction Box
115VAC
24VAC
40 VA
Transformer
Installation
Heat Circulating Blowers
Some EP-28 Series decorative fireplaces may be equipped with an
optional blower kit (Part # FAN28) for circulating heat into the living
space.
NOTE: If any of the original wire supplied with the appli-
ance is replaced, it must be replaced with the same
type, or its equivalent.
G
Black
White
Figure 11. Wiring for optional blower kit for decorative models.
Green
Refer to Fan-28 Installation Instructions for more information.
Installations in Canada which employ the fan kit, must be in accord-
ance with CSA C22.1 Canadian Electrical Code Part 1 and/or Local
Codes.
Installations in the USA employ the fan kit, must be in accordance
with local codes or, in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70-1987.
Supply
L1 L
WH
Fan Switch
BLK
XG0302C