Replacing A Front Turn Signal Light Bulb; Rear Turn Signal Light Bulb - Yamaha CYGNUS.X NXC125 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a front turn signal
light bulb
1
cC
It is advisable to have a Yamaha dealer
2
perform this job.
1. Place the scooter on the
3
centerstand.
2. Remove panel A. (See page 6-6.)
4
3. Remove the socket (together with
the bulb) by turning it counterclock-
5
wise.
4. Remove the defective bulb by push-
6 ing it in and turning it counterclock-
wise.
7
1
8
9
ZAUM00**
1. Socket
2. Turn signal light bulb
EAUT1360
5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
ECA10670
6. Install the socket (together with the
bulb) by turning it clockwise.
7. Install the panel.
2

Rear turn signal light bulb

If a rear turn signal light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
6-28
EAUT1330