Checking The Spark Plug - Yamaha CYGNUS.X NXC125 Owner's Manual

1
ZAUM00**
1. Panel B
2. Screw
To install the panel
Place the panel in the original position,
and then install the screws.
PERIODIC MAINTENANCE AND MINOR REPAIR

Checking the spark plug

The spark plug is an important engine
2(×4)
component, which is easy to check.
Since heat and deposits will cause any
spark plug to slowly erode, the spark
plug should be removed and checked in
accordance with the periodic mainte-
nance and lubrication chart. In addition,
the condition of the spark plug can re-
veal the condition of the engine.
To remove the spark plug
1. Remove panel C. (See page 6-6.)
2. Remove the spark plug cap.
3. Remove the spark plug as shown,
with the spark plug wrench included
in the owner's tool kit.
1
ZAUM00**
1. Spark plug wrench
EAUT1170
To check the spark plug
1. Check that the porcelain insulator
NOTE:
If the spark plug shows a distinctly dif-
ferent color, the engine could be defec-
tive. Do not attempt to diagnose such
problems yourself. Instead, have a
Yamaha dealer check the vehicle.
2. Check the spark plug for electrode
To install the spark plug
1. Measure the spark plug gap with a
6-7
around the center electrode of the
spark plug is a medium-to-light tan
(the ideal color when the vehicle is
ridden normally).
erosion and excessive carbon or
other deposits, and replace it if nec-
essary.
Specified spark plug:
CR7E (NGK)
wire thickness gauge and, if nec-
essary, adjust the gap to specifi-
cation.
1
2
3
4
5
6
7
8
9