Yamaha XCITY VP125 Owner's Manual page 63

ZAUM0675
1. Headlight bulb holder
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder by turning it clockwise.
CAUTION:
Take care not to damage the follow-
ing parts:
PERIODIC MAINTENANCE AND MINOR REPAIR
G
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
1
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
EWA10790
G
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
5. Install the headlight bulb cover.
6. Install the cowling.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
ECA10650
To replace a low beam headlight
bulb
1. Remove cowling A. (See page
6-5.)
2. Remove the headlight bulb cover.
ZAUM0677
1. Headlight bulb cover
3. Disconnect the headlight coupler.
4. Unhook the headlight bulb holder,
ZAUM0678
1. Headlight bulb
2. Headlight coupler
6-25
and then remove the defective
bulb.
1
6
1
2