Luggage Hook; Sidestand - Yamaha XCITY VP125 Owner's Manual

WARNING
Always adjust both shock absorber
assemblies equally, otherwise poor
handling and loss of stability may
result.
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring on each shock ab-
sorber assembly in direction (a). To de-
crease the spring preload and thereby
soften the suspension, turn the adjust-
ing ring on each shock absorber as-
sembly in direction (b).
NOTE:
Align the appropriate notch in the ad-
justing ring with the position indicator
on the shock absorber.
Spring preload setting:
Minimum (soft):
1
Standard:
2
Maximum (hard):
4
INSTRUMENT AND CONTROL FUNCTIONS
EWA10210

Luggage hook

1
ZAUM0700
1. Luggage hook
WARNING
G
Do not exceed the load limit of 3
kg (6.6 lb) for the luggage hook.
G Do not exceed the maximum
load of 185 kg (408 lb) for the ve-
hicle.
EAUT1070

Sidestand

ZAUM0648
1. Sidestand switch
The sidestand is located on the left side
EWAT1030
of the frame. Raise the sidestand or
lower it with your foot while holding the
vehicle upright.
NOTE:
The built-in sidestand switch is part of
the ignition circuit cut-off system, which
cuts the ignition in certain situations.
(See further down for an explanation of
the ignition circuit cut-off system.)
The vehicle must not be ridden with
the sidestand down, or if the side-
stand cannot be properly moved up
3-14
1
WARNING
EAU15301
3
EWA10240