Yamaha XCITY VP125 Owner's Manual page 21

"Mode"
1 2
"Mode"
4 3
"Mode"
ZAUM0391
1. Total
2. Trip 1
3. Trip 2
4. Trip/Fuel
NOTE:
The Trip/fuel odometer is only activated
if the fuel level warning light comes on.
Pushing the "SET" button when in the
tripmeter mode switches the display
between the different tripmeter func-
tions in the following order:
Trip 1 or Trip 2 → Time 1 or 2 → Aver-
age speed 1 or 2 → Trip 1 or Trip 2
INSTRUMENT AND CONTROL FUNCTIONS
"Mode"
ZAUM0392
1. Distance
2. Time
3. Average speed
If the fuel level warning light comes on
(See page 3-4.), the display will auto-
matically change to the fuel reserve
tripmeter mode "Trip/fuel" and start
counting the distance traveled from that
point. In that case, pushing the "MODE"
button switches the display between
the various tripmeter and odometer
modes in the following order:
Trip/Fuel → Trip 1 → Trip 2 → Total →
Trip/fuel
1
"Set"
2
"Set"
"Set"
3
ZAUM0393
To reset a tripmeter, select it by push-
ing the "MODE" button, and then push
the "SET" button for at least one sec-
ond. If you do not reset the fuel reserve
tripmeter manually, it will reset itself au-
tomatically and the display will return to
the prior mode after refueling and trav-
eling 5 km (3 mi).
Clock mode
To set the clock:
1. When the display is in the "Total"
2. When the hour digits start flashing,
3-6
mode, push the "SET" button for at
least two seconds.
push the "SET" button to set the
hours.
3