Lenovo ThinkServer TS440 User Manual page 137

6. Press the two tabs on the cover presence switch toward each other and carefully push the cover
presence switch upward at the same time to remove it out of the frame.
Figure 79. Removing the cover presence switch
7. Touch the static-protective package that contains the new cover presence switch to any unpainted
surface on the outside of the server. Then, remove the new cover presence switch from the package.
8. Insert the new cover presence switch with the cable into the cover presence switch frame.
Figure 80. Installing the cover presence switch
.
Chapter 6 Installing, removing, or replacing hardware
125