Lenovo ThinkServer TS440 User Manual page 117

4. Pull the handle and carefully slide the hot-swap hard disk drive or the dummy tray out of the front of
the chassis.
Figure 60. Removing the hot-swap hard disk drive or the dummy tray
5. Touch the static-protective package that contains the new hot-swap hard disk drive to any unpainted
surface on the outside of the server. Then, take the new hot-swap hard disk drive out of the package.
Note: Do not touch the circuit board on the hard disk drive.
1 1
U
C P
M
M E
U
P S
.
Chapter 6 Installing, removing, or replacing hardware
105