Garmin SEAT Portable System User Manual
  1. Manuals
  2. Brands
  3. Garmin Manuals
  4. Car Navigation system
  5. SEAT Portable System
  6. User manual

Garmin SEAT Portable System User Manual

Portable system
Hide thumbs Also See for SEAT Portable System:
Table of Contents

Advertisement

Quick Links

SEAT Portable System
User's manual
English (United Kingdom)
July 2013

Advertisement

Table of Contents
loading

Related Manuals for Garmin SEAT Portable System

Summary of Contents for Garmin SEAT Portable System

  • Page 1 SEAT Portable System User’s manual English (United Kingdom) July 2013...
  • Page 2 Neither this manual nor any parts thereof may be reproduced for any purpose whatsoever without the express written consent of Garmin Würzburg GmbH, nor may they be transmitted in any form either electronically or mechanically, including photocopying and recording. All technical specifications, drawings etc are subject to copyright law.

  • Page 3: Table Of Contents

    User’s manual SEAT Portable System Table of contents Introduction ..................9 About this manual ................9 1.1.1 Conventions................9 1.1.2 Symbols ................9 Legal notice ..................10 1.2.1 Liability ................10 1.2.2 Trade marks ............... 10 Questions about the product .............. 10 Before you begin ................
  • Page 4 User’s manual SEAT Portable System Options ....................30 Menus ....................30 Voice command ................30 Activating the voice command function ..........30 Use voice command ................31 Help ....................31 Deactivating the voice command function .......... 31 Configuring the voice command function ........... 31 Navigation..................
  • Page 5 User’s manual SEAT Portable System Map in Navigation mode ..............65 9.4.1 Navigation in Vehicle mode..........66 9.4.2 Navigation in Pedestrian mode ........... 70 9.4.3 Navigation in Track mode ........... 72 9.4.4 Navigation in Offroad mode ..........72 9.4.5 Map options in Navigation mode ......... 73 9.4.6...
  • Page 6 User’s manual SEAT Portable System 10.16 Special functions for electric vehicles ......... 99 10.16.1 Multi-Stop route ..............99 10.16.2 Driving range warning ............100 10.16.3 Private charging stations ........... 102 10.17 Special functions for CNG vehicles ........... 103 10.17.1 Multi-Stop route ..............103 10.17.2 Driving range warning ............
  • Page 7 User’s manual SEAT Portable System 12.2 Media Player ................... 132 12.2.1 Supported audio files ............134 12.2.2 Selecting a media source ..........134 12.2.3 Selecting files for playing back .......... 135 12.2.4 Selecting the play-back mode ........... 135 12.2.5 Controlling the play back ........... 136 12.3...
  • Page 8 User’s manual SEAT Portable System 13.7 Configuring the hands-free module ..........155 13.7.1 Preset ................155 13.7.2 Settings ................156 Live Services ................. 157 14.1 Costs ....................157 14.1.1 Data traffic costs ............... 157 14.1.2 Costs incurred when using the Live services ..... 158 14.2...

  • Page 9: Introduction

    User’s manual SEAT Portable System Introduction About this manual 1.1.1 Conventions For better legibility and clarification, the following styles are used in this manual: Bold and italics: Names of products Names of windows and dialogue boxes MALL CAPITALS Bold: Highlighting of important parts in the text...

  • Page 10: Legal Notice

    1.2.1 Liability The software and manual are subject to change without notice. Garmin Würzburg GmbH is not liable for the accuracy of the information contained in this manual or for damages resulting from the use of this manual. Suggestions for improvements and information regarding errors are always welcome so that we can supply you with even better products in the future.

  • Page 11: Description Of The Navigation Device

    User’s manual SEAT Portable System Description of the navigation device Touch-screen On/Off Slot for microSD memory card Microphone Mini USB socket for USB cable / mains adapter Important safety information In your own interest, please read the following safety information and warnings carefully before starting up your navigation system.

  • Page 12: Navigation Safety Information

    User’s manual SEAT Portable System 2.3.1 Navigation safety information Use the navigation system at your own risk. Caution! To prevent accidents, do not operate the navigation system while driving. Caution! Do not look at the screen unless it is absolutely safe to do so! Caution! Traffic regulations have priority over any instructions from the navigation system.

  • Page 13: Mounting/Removing The Navigation System

    Note: Create a backup of the data which exist in the internal memory of your navigation device. This is very easy to do with the Fresh software which can be downloaded free of charge from our website www.garmin.com/pid. Mounting/removing the navigation system The vehicle is already prepared for the navigation system to be installed.

  • Page 14: Mounting The Navigation Device

    User’s manual SEAT Portable System Removing the cradle 1. Press the button at the bottom of the cradle (see figure). 2. Holding the button pressed, take the cradle out of the opening. Fitting the cover 1. Place the cover over the opening.

  • Page 15: Memory Card

    Data backups, software updates and navigation map updates can be carried out quickly and conveniently with the Fresh software, which you can download free of charge from the website www.garmin.com/pid. Caution! Do not remove the memory card from the device while the data saved on it are in the process of being used, e.g.

  • Page 16: Navigating With Gps

    User’s manual SEAT Portable System Navigating with GPS GPS is based on a total of at least 24 satellites orbiting the Earth and continuously transmitting signals of their position and time. The GPS receiver receives this data and calculates its own geographical position on the basis of the information transmitted by the various satellites.

  • Page 17: Device Mounted In The Vehicle

    User’s manual SEAT Portable System Off: When you switch off the device, it consumes no energy. It can ► then take several months for the battery to become flat. Switching the device on again triggers a restart which can take some time (approx.

  • Page 18: Switching The Device To Standby Mode

    Using the Fresh software you can install a function which allows you to select the picture you want to use as the screensaver. Fresh can be downloaded free of charge from the website www.garmin.com/pid. The date, the time and the outdoor temperature are shown likewise on the picture which you selected yourself.

  • Page 19: Screensaver

    User’s manual SEAT Portable System Forgotten your password? It can happen that you activate the password but are then unable to remember it. If you forget your password, follow the procedure described in ► "Forgotten your password?" on page 22.

  • Page 20: Manual

    User’s manual SEAT Portable System The S window opens. TART From the S window you can access all the applications of the TART navigation device: Navigation, see page 32 ► Car info, see page 111 ► Media, see page 128 ►...

  • Page 21: Options

    User’s manual SEAT Portable System The content of the chapter is shown. With the (Up) and (Down) buttons you can scroll up one page and down one page respectively. With the (To the left) and (To the right) buttons you can open the previous or the next chapter respectively.

  • Page 22: Changing A Password

    User’s manual SEAT Portable System 4.1.1 Changing a password 1. In the N window tap on More functions > Settings > AVIGATION Options > Password lock. The E window opens. NTER PASSWORD 2. Enter the currently valid password in the Enter password box.
  • Page 23 User’s manual SEAT Portable System The GPS symbol can show the following GPS reception states: No GPS (No symbol): The built-in GPS receiver is not operational. Contact us if the problem persists (see "Questions about the product" on page 10).
  • Page 24 User’s manual SEAT Portable System Energy The Energy symbol can indicate the following states of the integrated battery: The device is mounted in the vehicle and is being supplied with power from the vehicle. The battery is fully charged. The device is mounted in the vehicle and is being supplied with power from the vehicle.

  • Page 25: Traffic Live

    User’s manual SEAT Portable System The mobile radio connection is interrupted. ► The Live server is not answering. ► (Light grey) Live Services ready: There is a connection to the Live server. The Live services are available. The number indicates which of the two smartphones is currently active as the Internet access point.
  • Page 26 User’s manual SEAT Portable System The Traffic Live symbol can indicate the following traffic information reception states: (Red) Connecting: The last attempt to call up traffic information from the Live server failed. This can be the case, for example, when travelling through a tunnel.
  • Page 27 User’s manual SEAT Portable System Muting The Muting symbol can indicate the following states: No symbol: The navigation application is not muted. Muting: The navigation application is muted. If the device is navigating at the moment, you will not hear any driving instructions.

  • Page 28: Software Keyboard

    User’s manual SEAT Portable System AUX-IN audio: The current audio source is an external device which is connected to the AUX port of the car radio. BT-Audio: The current audio source is an external device (mobile phone or smartphone) which is connected to the navigation device via Bluetooth.

  • Page 29: Entering Data

    User’s manual SEAT Portable System You can also switch from the Cyrillic or Greek keyboard to the Latin keyboard. Many addresses can then also be entered as transliterations or in the language of the user interface. Example: The language of the user interface is English. You want to navigate to Moscow.

  • Page 30: Options

    User’s manual SEAT Portable System Tap on (Open list) in order to call up this list. ► You can use the (Up) button and the (Down) button to move through the list. Tap on an entry in the list to select it and transfer it to the input box.

  • Page 31: Use Voice Command

    User’s manual SEAT Portable System Use voice command When the functions in a window can be called up by voice command, this is indicated in the top left corner of the window by the symbol (Voice command active). A single signal tone and the symbol (Speak) indicate that the navigation system is waiting for your voice command.

  • Page 32: Navigation

    User’s manual SEAT Portable System Select the tasks for which you want to use Voice Command: Complete: You can use all the voice command functions. ► Answering: You can enter addresses and answer questions ► asked by the navigation device.

  • Page 33: Starting The Navigation Application

    User’s manual SEAT Portable System Starting the navigation application You have switched on the navigation device. The S window is TART open. Tap on Navigation. ► The N window is opened. From here you can access all the AVIGATION functions of the navigation application.

  • Page 34: Specifying A Destination

    User’s manual SEAT Portable System Returning to the Navigation window The N window opens when the navigation application is AVIGATION started. If another window of the navigation application is open, tap on (Back). This will return you to the window you came from.

  • Page 35: Entering A Destination By Voice Commands

    User’s manual SEAT Portable System If your destination is in a different country, then proceed as follows: 1. Tap on the Country button. 2. Enter the name of the country in which your destination is situated. The button shows the flag of the destination country.

  • Page 36: Entering A Destination Address

    User’s manual SEAT Portable System 4. Say the number of the destination to which you want to navigate. Say "Up" or "Down" in order to scroll in the list. When you have selected a destination, the map opens in Preview mode.

  • Page 37: Enter Coordinates

    User’s manual SEAT Portable System 4. Tap on Start navigation in order to navigate to the stipulated address. - or - Tap on Parking in order to search for and navigate to a car park near your destination. Tap on Parking Charging > Charging near the destination in order to search for a charging station near the destination.
  • Page 38 User’s manual SEAT Portable System Entering as a decimal number 2. Enter the degree of latitude. Begin the entry with a minus sign if you want to enter a southern degree of latitude. 3. Enter the degree of longitude. Begin the entry with a minus sign if you want to enter a western degree of longitude.

  • Page 39: Points Of Interest

    User’s manual SEAT Portable System Note: If the destination with the coordinates you entered does not lie on the road system covered by the map, navigation will be performed as far as the nearest road point using the mode defined by the selected route profile.
  • Page 40 User’s manual SEAT Portable System 2. Select a category from which you would like to find a POI. Categories in which no destinations are available nearby cannot be selected. If sub-categories exist for the category you have selected, the Sub category list opens.
  • Page 41 User’s manual SEAT Portable System 2. Select a category from which you would like to find a POI. The Destination list opens. It contains the POI from the selected category, sorted alphabetically. 3. If the list is very long: Tap on (Close list).

  • Page 42: Direct Access To Poi

    User’s manual SEAT Portable System 4. Select the sub-category from which you would like to select a POI. The Destination list opens. It contains POIs from the specified category, sorted alphabetically. 5. If the list is very long: Tap on (Close list).

  • Page 43: Information About The Destination

    User’s manual SEAT Portable System Note: GPS reception must be good enough for determining your position. Check the (GPS ready) symbol to see whether GPS reception is good enough. If GPS reception is not good enough, the system will look for POIs near the last known position.

  • Page 44: Favourites

    User’s manual SEAT Portable System Note: The Call function is only available when the navigation system is connected via Bluetooth to a mobile phone. For details of how to connect to a mobile phone refer to chapter "Bluetooth connection" on page 143.

  • Page 45: Last Destinations

    User’s manual SEAT Portable System 7.2.9 Last destinations The last 12 destinations to which you have navigated are saved by the navigation system in the L list. AST DESTINATIONS 1. In the N window, tap on My destinations > Last AVIGATION destinations.

  • Page 46: Navigating Home

    User’s manual SEAT Portable System Tap on Parking Charging > Charging near the destination in order to search for a charging station near the destination. The map opens in Preview mode. The destination is indicated on the map. For detailed information on how to start navigation, please refer to the chapter "Route preview"...

  • Page 47: Route Preview

    User’s manual SEAT Portable System The D window opens. The detailed address data ESTINATION ON MAP of the selected destination is displayed in the upper left-hand corner. 5. Tap on Take me there. The map opens in Preview mode. The destination is indicated on the map.

  • Page 48: Start Navigation

    User’s manual SEAT Portable System MyRoutes When the MyRoutes function is activated, the navigation system calculates up to three routes on the basis of the currently selected route profile and shows them on the map in different colours (red, green, blue) and with a number.

  • Page 49: Managing Destinations

    User’s manual SEAT Portable System Note: Traffic information (TMC) is then available to a limited extent only. No GPS reception If GPS signal reception is not good enough, the following message will appear: "Waiting for GPS-Signal…" You have the following options: Wait.

  • Page 50: Deleting A Destination From The Favourites List

    User’s manual SEAT Portable System 4. Tap on Save. The C window opens. There you can specify HARGING STATION whether the indicated destination is a charging station at which the vehicle can be charged (Normal charging station or High-speed charging station) or not (No). If you save the destination as a charging option, it will be considered as a possible charging station when a Multi-Stop route is calculated.
  • Page 51 User’s manual SEAT Portable System If you have already saved favourites, the message will be as follows: "Do you want to enter the address, or do you want to select it from the favourites?" The currently valid value is highlighted (red).

  • Page 52: Changing The Home Address

    User’s manual SEAT Portable System The C window opens. There you can specify HARGING STATION whether you can charge your vehicle at the indicated destination (Normal charging station or High-speed charging station) or not (No). If you save the destination as a charging option, it will be considered as a possible charging station when a Multi-Stop route is calculated.

  • Page 53: Entering Route Points

    User’s manual SEAT Portable System The starting point is only important if you want to see a planned route on the map but currently have no GPS reception, or if you are not currently at the planned starting point. This is why your selected starting point has the flow number "0".

  • Page 54: Editing Route Points

    User’s manual SEAT Portable System 4. Tap on (Add). The selected route point is now shown next to its flow number. Repeat these steps for each destination that you want to add to your route. 7.4.3 Editing route points Route points can be deleted from a route. The order of the route points can be changed as you wish.

  • Page 55: Loading Routes Or Tracks

    User’s manual SEAT Portable System 3. Tap on (Save). If a route has already been saved under this name, you will be notified accordingly. Tap on Yes to overwrite the route ► - or - Tap on No if you want to enter a different name.

  • Page 56: Simulating Routes

    User’s manual SEAT Portable System Tap on Show route. ► The map opens in Preview mode. The starting point and the route points are marked by flags. The distance and the estimated trip time is given for each leg of the route.
  • Page 57 For details of how to create and select route profiles refer to the chapter "Route profiles" on page 78. Note: When you load routes which originate from a different provider than GARMIN, it may be impossible for you to change the route profile of this route. Turn-by-Turn list If you want to see detailed directions for the route, tap on Options >...
  • Page 58 User’s manual SEAT Portable System Start navigation Tap on the button of the route which you want to use for the ► navigation. Traffic obstruction along the route If you select a route for which traffic obstructions have been announced,...

  • Page 59: Options, More Functions

    User’s manual SEAT Portable System Options, more functions From some windows you can reach more functions. 1. In the N window tap on More functions. AVIGATION - or - Tap on Options. 2. Tap on the option you would like to use.
  • Page 60 MyReport: Opens the M window. Here you can notify EPORT Garmin Würzburg about any changes to traffic monitoring systems and routing. MyRoutes: Opens the map in Preview mode. You are provided with up to three different suggestions as to how you can continue your journey. Select one of the routes offered.
  • Page 61 User’s manual SEAT Portable System Save as favourite: Saves the selected destination to the F list (see AVOURITES "Saving destinations" on page 49). Save destination: Saves the selected address in the F list (see AVOURITES "Saving destinations" on page 49).

  • Page 62: Working With The Map

    User’s manual SEAT Portable System Working with the map Selecting the navigation map Each country has its own navigation map. However, seamless navigation over several countries on one continent is possible if a continuous route can be planned on the maps saved.
  • Page 63 User’s manual SEAT Portable System The following features are typical for this view: Indicated in the middle of the lower third is your current position (red ► arrow). The map view follows your movements so that your position is always visible on the screen.

  • Page 64: Map In Preview Mode

    User’s manual SEAT Portable System Map in Preview mode You have entered a destination and tapped on Start navigation. - or - You have planned or loaded a route and tapped on Show route. The map opens in Preview mode.

  • Page 65: Map In Navigation Mode

    User’s manual SEAT Portable System In the following cases only one route is shown: The MyRoutes function is deactivated. ► You have planned a route with more than one route point. ► A route profile with the Pedestrian speed profile is active.

  • Page 66: Navigation In Vehicle Mode

    User’s manual SEAT Portable System 9.4.1 Navigation in Vehicle mode After the route was shown in Preview mode, navigation was started. The map opens in Navigation mode. If any information is available about the sign which you should follow, it will be shown at the top edge of the screen.
  • Page 67 User’s manual SEAT Portable System The large arrow box shows a diagram of the next junction which you should turn on to. The distance remaining to this junction is indicated underneath. As you get closer to the junction you will see a bar in addition to the distance: The fuller the bar, the closer you are to the junction.
  • Page 68 User’s manual SEAT Portable System When you get close to a Sightseeing sight, the Sightseeing button will appear instead of the height above sea level and the speed (point 10). The distance indicated on the button tells you how far away the sight is (beeline).

  • Page 69: Reality View

    User’s manual SEAT Portable System Tap on Options > Route > Turn-by-Turn list in order to view a turn- ► by-turn list (see "Turn-by-Turn list" on page 95). Tap on (destination search) to view the map in ► destination search mode (see "Map in destination search mode"...

  • Page 70: Navigation In Pedestrian Mode

    User’s manual SEAT Portable System The Reality View mode shows with greater clarity the signposting and lanes you must follow. This display does not change until you have passed the spot indicated. The map will then change back to Navigation mode.

  • Page 71: Operating The Map

    User’s manual SEAT Portable System If you are navigating on a route and more route points are still to ► follow, navigation to the next route point will be started immediately after the message. Traffic messages are not taken into account.

  • Page 72: Navigation In Track Mode

    User’s manual SEAT Portable System Zoom in: The map section becomes smaller, but you will see more details. Centre the position: During pedestrian navigation you can shift the visible map section in order to view the surrounding area on the map.

  • Page 73: Map Options In Navigation Mode

    User’s manual SEAT Portable System If you enter a destination which lies off the digitalised road system, the navigation will guide you first in Vehicle mode to the point of the digitalised road system that lies nearest to the destination. From here the navigation then continues in Offroad mode.
  • Page 74 User’s manual SEAT Portable System When you are driving, the map does not change. It is always orientated with north at the top. Zoom Out: The map section shown becomes larger, but you will see fewer details. Zoom in: The map section becomes smaller, but you will see more details.

  • Page 75: Operating In Destination Search Mode

    MyReport: Opens the M window. Here you can notify EPORT Garmin Würzburg about any changes to traffic monitoring systems and routing. Interim destination: Sets the selected point as interim destination. The navigation system will first guide you to this interim destination.

  • Page 76: Range 360 Map View

    User’s manual SEAT Portable System Range 360 map view The Range 360 map view shows the possible radius of action on the map. The current battery charge and the level of consumption are considered. The area lying within range is highlighted. The display is continuously updated during travel.
  • Page 77 User’s manual SEAT Portable System Reliable return The highlighted area shows the distance you can travel from your current position and still return reliably to the home address. Note: The radius of action for the return trip can be shown only if the indicated home address is still reachable.

  • Page 78: Configuring The Range 360 Map View

    User’s manual SEAT Portable System The larger of the two highlighted areas corresponds to the One way view. The smaller of the two areas indicates the distance you can still drive from your current position and still reach the home address reliably on the subsequent return trip.

  • Page 79: Basic Profiles

    User’s manual SEAT Portable System Use of toll roads: defines whether toll roads are allowed to be used ► when calculating the route Tap on the (Edit) button. ► The U window opens. SE OF TOLL ROADS Adapt the individual settings to your needs (Yes, No, Ask ►...

  • Page 80: Selecting A Route Profile

    User’s manual SEAT Portable System 2. Tap on the (Current route profile) button. This button can also show a different symbol. 3. Tap on the name of the route profile which you want to take as basis for the new profile.
  • Page 81 User’s manual SEAT Portable System If you activate the Ask before setting, each time the route preview wants to calculate a route with a toll road you will be asked whether you want to use the type of toll roads in question. You can then lay down this setting for future journeys as well.

  • Page 82: Mypois

    User’s manual SEAT Portable System 10.2 MyPOIs You can create files with your own POIs. These files have to be made available to your navigation system in a specific folder. If you want to choose from your own POIs, you will find them under the MyPOIs category of POIs.

  • Page 83: Symbols For Your Own Pois

    User’s manual SEAT Portable System Example: 9.94302,49.79906,Garmin Würzburg GmbH,PHONENUMBER=+4 9 931~Best Navigation Devices 3. Repeat step 2 for each destination you want to save in this file. 4. Click on File > Save. 5. Select a folder in which you want to save the data.

  • Page 84: Tracks

    User’s manual SEAT Portable System 10.3 Tracks You can record any section of a route you take, even if it lies off the digitalised road system. You can record for example a bicycle tour and follow the same route again some time later.

  • Page 85: Parking Close To The Destination

    User’s manual SEAT Portable System Note: When you are navigating along a recorded track, any incoming TMC messages will not be checked to see if they concern the track in question. 10.4 Parking close to the destination When you get close to your destination, the (Parking) button will appear on the screen.

  • Page 86: Back To The Destination

    Note: Clever Parking information is not available as standard. You can easily purchase it however via the Fresh software. Regular updates of this information are also available from there. Fresh can be downloaded free of charge from the website www.garmin.com/pid. 10.4.3 Back to the destination You have reached your destination.

  • Page 87: Nearby

    User’s manual SEAT Portable System You will be shown more information about this charging station. 4. Tap on Add. 5. The navigation now guides to the selected charging station in the mode corresponding to the selected route profile. 6. Tap on OK.

  • Page 88: Displaying Pois Along The Route

    User’s manual SEAT Portable System 10.6.1 Displaying POIs along the route 1. Tap on the (POIs on your route) button which appears at the top left of the map (see point 2 in "Navigation in Vehicle mode" on page 66).

  • Page 89: Navigating To One Of The Destinations

    User’s manual SEAT Portable System The list contains the next 5 POIs, sorted by distance in descending order, which lie along your route and are in the stipulated category. The nearest POI is therefore the lowest entry in the list.

  • Page 90: Sightseeing

    User’s manual SEAT Portable System 6. The POI list opens. If there are POIs of the newly S ON YOUR ROUTE selected category along the route, they will already appear in the list. 7. Tap on (Back) in order to close the list.
  • Page 91 User’s manual SEAT Portable System Note: During navigation in Pedestrian mode you will receive a pointer only when your destination is a Sightseeing destination and you are getting close to your destination. Displaying information about a Sightseeing sight You have chosen to be informed about Sightseeing sights (refer to ►...

  • Page 92: Sightseeing Tours

    User’s manual SEAT Portable System 10.8 Sightseeing tours Sightseeing tours are predefined routes with destinations of scenic, cultural or touristic interest which are sorted according to various categories. Note: The navigation software contains only a limited number of sightseeing tours. An update with more than 100 sightseeing tours can be purchased via Fresh.

  • Page 93: Direct Help

    User’s manual SEAT Portable System You can also edit the various legs. You can add new legs, delete legs and change their order. For details of how to edit the route refer to the chapter "Tracks and multi-leg routes" on page 52.

  • Page 94: Gps Status, Saving The Current Location

    User’s manual SEAT Portable System Note: The Call function is only available when the navigation system is connected via Bluetooth to a mobile phone. For details of how to connect to a mobile phone refer to chapter "Bluetooth connection" on page 143.

  • Page 95: Turn-By-Turn List

    User’s manual SEAT Portable System Note: If you are currently driving on a motorway, the alternative route will begin at the next exit. Indicated on the buttons is the junction up to which the block extends. The system recalculates the route. The blocked route section will be avoided.

  • Page 96: Low Fuel Warning

    User’s manual SEAT Portable System Indicates whether you want to drive on the route section in question or not. (Allow): The section in question is allowed on the route. (Forbid): The section in question is not allowed on the route.

  • Page 97: Optical Parking System (Ops), Parking Assistant

    User’s manual SEAT Portable System The indicated remaining range depends on the current consumption. Tap on Cancel if you do not want to buy more fuel until later. ► While navigation is in progress (map in Navigation mode) 1. Tap on Search if you want to drive to a petrol station now.
  • Page 98 User’s manual SEAT Portable System Note: Information about parking assistance can also be found in the user manual issued for your vehicle, in section "OPS" or "Optical parking system". Parking assistance gives you assurance when manoeuvring, particularly when parking. It indicates the distance and the position of obstacles in front of and behind the vehicle.

  • Page 99: Door Monitoring

    User’s manual SEAT Portable System 10.15 Door monitoring The door monitoring function always warns you when a door in your vehicle is open. When a door is open, it is pictured as open and highlighted in colour. Tap on the screen to hide the door monitoring.

  • Page 100: Driving Range Warning

    User’s manual SEAT Portable System Before navigation begins you will be presented with a window in which you can choose between a Multi-Stop route or the current route. Tap on Multi-Stop route to have the system calculate a route with ►...
  • Page 101 User’s manual SEAT Portable System Activating the range warning 1. In the N window tap on Options > Settings > Navigation. AVIGATION 2. Set the Driving range warning setting to Yes. Range warning during navigation You will be warned if one of the following cases arises: There is only one more charging station or the home address within ►...

  • Page 102: Private Charging Stations

    User’s manual SEAT Portable System If a charging station lies within the current range, you will be asked whether you want to drive to this charging station next. Tap on Calculate if you want to make a charging stop there.

  • Page 103: Special Functions For Cng Vehicles

    User’s manual SEAT Portable System Tap on No if there is no charging possibility at this favourite. ► Tap on Normal charging station if you can charge you vehicle at ► normal speed at this favourite's address. This is possible at many standard household power sockets and at most public charging stations with alternating current (AC).

  • Page 104: Driving Range Warning

    User’s manual SEAT Portable System Before navigation begins, you are presented with a window in which you can choose to use a Multi-Stop route or not. Tap on Multi-Stop route to have the system calculate a route with ► the necessary refuelling stops.

  • Page 105: Tmc (Traffic Information)

    User’s manual SEAT Portable System Range warning during navigation You will be warned if one of the following cases arises: The range of the CNG tank is reduced to such an extent that you ► can only just reach your destination.

  • Page 106: Preview Tmc

    User’s manual SEAT Portable System You can receive traffic information from the Live server. One of the server's functions is to evaluate anonymously collected floating car data from the many users of Live services. As the result, traffic jams can be detected and avoided more quickly and more reliably.
  • Page 107 User’s manual SEAT Portable System Zoom Out: The map section shown becomes larger, but you will see fewer details. Zoom in: The map section becomes smaller, but you will see more details. Original map section: The original map section is shown again.

  • Page 108: Displaying Traffic Information

    User’s manual SEAT Portable System 10.18.2 Displaying traffic information Current traffic information is available via the options button in many windows. In the N window, tap on Options > Traffic. AVIGATION ► The T window opens. RAFFIC INFORMATION You can use the...

  • Page 109: Showing A Single Message In Detail

    User’s manual SEAT Portable System Yellow: The section is not fully blocked by the obstruction but there is a threat of delays (10-30 minutes). This can be the case for example with slow-moving traffic. No colour: The obstruction is not classified as serious. This can be the...

  • Page 110: Tmc Settings

    User’s manual SEAT Portable System 10.18.4 TMC settings In the T window tap on Settings. RAFFIC INFORMATION ► In the TMC window you can set the TMC traffic station and SETTINGS configure whether the reception of a traffic message concerning your route should affect your route planning and if so how.

  • Page 111: Car Info

    User’s manual SEAT Portable System Recording trips You can have all trips recorded automatically. 1. In the N window tap on More functions > Settings > AVIGATION Navigation. 2. Set Logbook to Yes. 3. Tap on OK. Every trip from now on will be recorded until you reset Logbook to No. It is possible, however, to exclude individual trips from the recording.

  • Page 112: Trip Computer

    User’s manual SEAT Portable System 11.1 Trip computer The trip computer presents your vehicle's travel and consumption data. 11.1.1 Opening the trip computer 1. If necessary, tap on (Main menu) to open the S TART window. 2. In the S window, tap on Car info >...

  • Page 113: Status

    User’s manual SEAT Portable System 11.2 Status The navigation device can show two round instruments. You can configure which instruments are shown. 11.2.1 Opening the Status window 1. If necessary, tap on (Main menu) to open the S TART window.

  • Page 114: Performance Display

    User’s manual SEAT Portable System 11.3 Performance Display Note: This chapter concerns you only if you own a SEAT Cupra. From the Performance Display window you have access to additional applications such as the presentation of acceleration forces. With the application you can drive against the clock.

  • Page 115: G-Force

    User’s manual SEAT Portable System Note: You can change the units for Boost pressure and Coolant temperature in the options (see "Options" on page 121). 11.3.3 G-Force Open the G-F application (see "Open the applications of the ORCE ► Performance Display window" on page 114).

  • Page 116: Performance

    User’s manual SEAT Portable System 11.3.4 Performance Open the P application (see "Open the applications of ERFORMANCE ► the Performance Display window" on page 114). The P window presents the following values: ERFORMANCE RPM gauge Tap on the instrument to configure it. Boost pressure or RPM gauge ►...

  • Page 117: Stopwatch

    Caution! The driver makes use of the PERFORMANCE DISPLAY Application (hereinafter the Application) at its own risk, being obliged to use it pursuant to the Law and shall be liable before SEAT and/or third parties for any damage resulting from any breach of said obligation. The Application is designed to be used on closed race tracks only, so that the driver is not authorised to use it on open roads.
  • Page 118 User’s manual SEAT Portable System Driving against the clock In the S and D windows you can measure the time you PEED ISTANCE need to reach a certain speed or cover a certain distance. The speed or distance is divided into 4 sectors so that interim times can be indicated.
  • Page 119 User’s manual SEAT Portable System Interim time. Upon reaching a sector the clock shows the comparative time relative to previous measurements. In the options you can select whether you want the comparative time to be calculated on the basis of your best time or average time (see "Options"...

  • Page 120: Statistics

    User’s manual SEAT Portable System Set distance You can set the distance which you want to cover. 1. In the S window tap on Set distance. TOPWATCH The S window opens. ELECT GOAL DISTANCE 2. Enter the distance which you want to cover.

  • Page 121: Options

    User’s manual SEAT Portable System 11.3.7 Options In the Options you can set the following: Unit of temperature: Select which unit you want to be used for ► temperature values (Celsius (°C) or Fahrenheit (°F)). Unit of pressure: Select which unit you want to be used for pressure ►...
  • Page 122 User’s manual SEAT Portable System The following states can be presented: Driving The vehicle is moving, the driver has his foot on the accelerator. Energy is being consumed from the battery. Recuperation The vehicle is moving and being decelerated by the driver or the motor brake.

  • Page 123: E-Manager

    User’s manual SEAT Portable System 11.4.3 e-manager This application can be used to plan for charging and air conditioning operations in accordance with departure times. Charging locations can also be defined for assignment to the departure times. Open the window (see "Opening the applications for MANAGER ►...
  • Page 124 User’s manual SEAT Portable System (Charging): The charging of the battery is activated. ► Week-day: The week-day which was set when defining the ► departure time. Time: The time which was set when defining the departure time. ► If there are active error messages for the charging of the battery or for the air conditioning, Charging messages will be shown here.
  • Page 125 User’s manual SEAT Portable System Night current: Activate the checkbox alongside this setting ► if a cheaper off-peak rate is available. Then tap on the setting and use the (Up) and (Down) buttons to set when your off-peak rate begins and ends. The battery will then be charged preferably during this period.
  • Page 126 User’s manual SEAT Portable System 3. Tap on the required charging location to select it. The D window opens again. EPARTURE TIME 4. Tap on Save. window opens. MANAGER Settings Note: The following settings cannot be defined for a single charging location.
  • Page 127 User’s manual SEAT Portable System Editing the charging location 1. In the window tap on (List) to the right of the MANAGER Charging stations entry. The C list opens. HARGING STATIONS 2. Tap on the (Edit) button to the right of the charging location you want to edit.

  • Page 128: Energy Recovery

    User’s manual SEAT Portable System 11.4.4 Energy recovery This application presents a bar diagram of the energy which was recovered in your electric vehicle during the last 30 minutes, e.g. during braking or downhill coasting. Open the E window (see "Opening the NERGY RECOVERY ►...

  • Page 129: Controlling The Car Radio

    User’s manual SEAT Portable System 12.1 Controlling the car radio You can use the navigation device to control basic functions of the car radio. (Main menu) to open the S 1. If necessary, tap on TART window. 2. In the S window, tap on Media >...

  • Page 130: Selecting The Frequency Band

    User’s manual SEAT Portable System Scan. Searches the entire frequency band for radio stations. Each radio station found is played for several seconds before the next is searched for. Tuning up. Searches for the next higher frequency at which a radio station can be received (see also "Selecting a radio station"...

  • Page 131: Selecting A Radio Station

    User’s manual SEAT Portable System 12.1.3 Selecting a radio station Instead of setting a specific frequency you can search manually for radio stations. Note: In the car radio you can set whether the radio station search function is to search for all stations or whether only the stations in the memory list are to be searched through.

  • Page 132: Media Player

    User’s manual SEAT Portable System The radio station is now saved. 3. Tap on Close. The R window opens again. The number of the memory ADIO location is now shown in front of the name of the radio station. Selecting a saved radio station 1.
  • Page 133 User’s manual SEAT Portable System Currently selected source. See also point 10. Media data (ID3 tag). Here you are shown (from top to bottom) the name of the music item currently being played, the name of the artist and album, and the album cover (top left), provided these data have been saved in an ID3 tag.

  • Page 134: Supported Audio Files

    User’s manual SEAT Portable System 12.2.1 Supported audio files You can control the play back of audio CDs which have been inserted in the CD player of the navigation device. Also, you can play back audio files in the following formats: MP3, WMA, OGG Vorbis, AAC, FLAC 12.2.2...

  • Page 135: Selecting Files For Playing Back

    User’s manual SEAT Portable System Note: A change of memory card is detected only when the device has been switched on. If the memory card is not detected, insert it again when the device is on and running. 12.2.3 Selecting files for playing back...

  • Page 136: Controlling The Play Back

    User’s manual SEAT Portable System (Mix): The items of the current folder and its sub-folders will be played in random order. (Repeat): The items of the current folder and its sub- folders will be played in the order indicated. When all the items have been played, play back starts again from the beginning.

  • Page 137: Traffic Information (Tp)

    User’s manual SEAT Portable System Note: The options are available only when the navigation device is mounted in the vehicle. 12.3.1 Traffic information (TP) The car radio can phase out the playing back of music or navigation instructions and have traffic messages announced instead when traffic information is available.

  • Page 138: Volume

    User’s manual SEAT Portable System The values for treble and bass are indicated in colour on vertical scales (red). The balance is presented in colour on a schematic view of the vehicle's interior (red). If rear loudspeakers are installed, the fader for the front-rear balance is also shown.

  • Page 139: Opening The Picture Viewer

    User’s manual SEAT Portable System They are also subject to file size limitations: File format Max. size JPG, JPEG, BMP 4 MB All others 1 MB 12.4.2 Opening the picture viewer 1. If necessary, tap on (Main menu) to open the S TART window.

  • Page 140: Selecting The Play-Back Mode

    User’s manual SEAT Portable System 12.4.5 Selecting the play-back mode The viewing order of the pictures can be influenced. 1. In the P window tap on Browse. ICTURES The F window opens. ILE MANAGER Visible at the bottom edge of the window are buttons for the play- back modes.

  • Page 141: Background For The Screensaver

    Note: This function is not available as standard. However, you can install it very easily via the Fresh software. Fresh can be downloaded free of charge from the website www.garmin.com/pid. You can use any picture on the memory card as background for the screensaver.
  • Page 142 User’s manual SEAT Portable System Opening the hands-free module 1. If necessary, tap on (Main menu) to open the S TART window. 2. In the S window tap on Phone. TART The H window opens. ANDSFREE MODULE When you start the hands-free module for the first time, a window will open in which you can start a search for Bluetooth-capable devices.

  • Page 143: Bluetooth Connection

    User’s manual SEAT Portable System Speed Call buttons. See "Preset" on page 155. Back to the previously opened window. Opens the T window. Here you can enter which devices RUSTED DEVICES are connected to the hands-free module (see "Connecting to a device"...

  • Page 144: Pairing With A Device

    User’s manual SEAT Portable System The navigation device can connect automatically to the last connected device as soon as it is within range. The hands-free module of the navigation device can save and manage the connection data of up to 4 paired mobile phones or Bluetooth- capable MP3 players.

  • Page 145: Pairing From The Mobile Phone

    User’s manual SEAT Portable System 13.1.2 Pairing from the mobile phone Note: Please consult the mobile phone's manual if you are uncertain about how to carry out the following steps on the mobile phone. 1. Make sure that the Bluetooth function is activated on both the mobile phone and the navigation device.

  • Page 146: Connecting Automatically

    User’s manual SEAT Portable System Connecting manually If a Bluetooth connection to a device is active, you must disconnect this connection first before you can connect to a different device. The existing connection is disconnected automatically as soon as the connection to a different device is initiated.

  • Page 147: Activating A Mobile Phone

    User’s manual SEAT Portable System 13.1.4 Activating a mobile phone If the hands-free module is connected to two mobile phones, you can select in the H window which is to be the active ANDSFREE MODULE telephone. If you want to call someone, the call will be made via the active phone.

  • Page 148: Importing A Phone Book

    User’s manual SEAT Portable System 13.1.6 Importing a phone book For each paired mobile phone in the T list it is also RUSTED DEVICES possible to import its phone book and save it together with the connection data. Access to the phone book of a mobile phone is then only possible when the navigation device is connected to the mobile phone from which the phone book was imported.

  • Page 149: Importing Recent Calls

    User’s manual SEAT Portable System For more details about the phone book refer to the chapter "Calling a contact from the phone book" on page 152. 13.1.7 Importing recent calls For each paired mobile phone in the T list it is also...

  • Page 150: Making A Call

    User’s manual SEAT Portable System When you receive a text message (SMS), a signal tone will sound and the I window will open. The header line shows NCOMING TEXT MESSAGE which connected telephone received the text message. The name and the number of the sender will be displayed if this information is available.

  • Page 151: Dialling A Telephone Number

    User’s manual SEAT Portable System 4. Wait for the numbers you said to appear. Repeat steps 3 to 4 until the complete phone number is shown on the display. Say "Correction" if the last number you said was not understood correctly.

  • Page 152: Calling A Contact From The Phone Book

    User’s manual SEAT Portable System Note: If the selected Speed Call button has not been configured yet, it will be labelled with just three dots (…). If you tap on the symbol, the "M " window will open (see "Preset" on page 155).

  • Page 153: Transferring A Call From Your Mobile Telephone

    User’s manual SEAT Portable System Note: The R list is available to the hands-free module only ECENT CALLS for as long as the hands-free module is connected to the mobile phone. 13.4.6 Transferring a call from your mobile telephone The navigation device takes calls automatically from the mobile phone as soon as a Bluetooth connection is established between the two devices.

  • Page 154: Transferring A Call To The Mobile Phone

    User’s manual SEAT Portable System The person on the other end of the line can no longer hear you. The modified symbol on the button indicates this. Tap on (Muting) to switch the microphone on again. ► 13.5.4 Transferring a call to the mobile phone In the C window, tap on Options >...

  • Page 155: Configuring The Hands-Free Module

    User’s manual SEAT Portable System (Unopened text message) (Opened text message) 2. Tap on the entry you want. Note: The T list is available to the hands-free module only for EXT INBOX as long as the hands-free module is connected to the mobile phone. It is updated automatically each time it is opened.

  • Page 156: Settings

    User’s manual SEAT Portable System Deleting a Speed Call number 3. Tap on the (Delete) button. 4. Confirm that you want to delete the Speed Call number. The P window opens again. No phone numbers and no name RESET exist any longer for the selected Speed Call button.

  • Page 157: Live Services

    User’s manual SEAT Portable System For information about configuring the settings in this window refer to "Configuring the navigation system" on page 163. Note: In order for the last connection to be restored without further questioning, the navigation device must be saved in your mobile phone as "authorised"...

  • Page 158: Costs Incurred When Using The Live Services

    Please note however that e.g. information for the Traffic Live service does not exist in every country on a nation-wide basis. For more details about the availability and scope of the Live services in various countries and about subscriptions go to www.garmin.com/pid. 14.2 Requirements for using the Live services You have a tethering-capable smartphone with one of the following ►...

  • Page 159: Using The Smartphone's Internet Connection

    User’s manual SEAT Portable System The L window opens. From there you have access to all the settings of Live. The system checks whether the navigation device is connected to a ► smartphone via Bluetooth. If there is no connection to a smartphone, you will be asked whether you now want to set up a Bluetooth connection.

  • Page 160: Local Search

    User’s manual SEAT Portable System Weather data for your destination You can call up weather data for your destination at any time during navigation. Tap on Options > Services > Weather service. ► The W window opens. You are shown a map view EATHER SERVICE containing the destination selected for the navigation.
  • Page 161 User’s manual SEAT Portable System Note: Yelp allows the use of the Local search service only if you observe its conditions of use which can be viewed at www.garmin.com/pid. 1. In the N window tap on (Live) > Local search.

  • Page 162: Traffic Information

    User’s manual SEAT Portable System Tap on (Call) in order to dial the number indicated. ► Note: The Call function is only available when the navigation device is connected via Bluetooth to a mobile phone. Whether and how a Bluetooth connection can be established is described in chapter "Bluetooth connection"...

  • Page 163: Configuring The Navigation System

    User’s manual SEAT Portable System The S window opens. ETTINGS Use Live services: Select whether you want the Live services to be available (Yes or No). Source of traffic information: Select the traffic information source you want to use (Live services or radio stations). The Live services -also include floating car data from numerous vehicles in its analysis of the traffic situation.
  • Page 164 User’s manual SEAT Portable System Some settings can adopt many different values. These settings can be recognised by the (List) button. The current value is visible. 1. Tap on (List). A list with all possible values opens. The currently valid value is marked.

  • Page 165: Appendix

    User’s manual SEAT Portable System Appendix 16.1 Technical data of the navigation device Model: 4NSF Dimensions 137,7 x 83,3 x 18,2 mm Weight 191 g Operating -10°C to 70°C (14°F to 158°F) temperature Operating Storage conditions -20°C to 60°C (-4°F to 140°F)

  • Page 166: End User Licence Agreement For Software And Data

    Garmin Ltd. or its subsidiaries (“Garmin”). The map data embedded in or accompanying your Garmin product (the “Map Data”) is owned by a third party and is licensed to Garmin. Garmin also licenses information, text, images, graphics, photographs, audio, video and other applications and data from other third party data providers (“Third Party...
  • Page 167 No warranty. This Product (including the Data) is provided to you “as is,” and you agree to use it at your own risk. Garmin and its licensors (and their licensors and suppliers) make no guarantees, representations...
  • Page 168 (by you or by Garmin) or expires, or (ii) Garmin terminates this Agreement for any reason, including, but not limited to, if Garmin finds that you have violated any of the terms of this Agreement. In addition, this Agreement shall terminate immediately upon the termination of an agreement between Garmin and any third party from whom Garmin licenses the Data.

  • Page 169: Declaration Of Conformity

    Garmin International, Inc., 1200 East 151st Street, Olathe, KS 66062, USA. Garmin® is a trademark of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin.

  • Page 170: Troubleshooting

    This list does not claim to be complete. Answers to many other questions can be found on the Garmin Würzburg GmbH website (see "Questions about the product" on page 10). I have connected a charger to the navigation device. A connection to a computer is shown on the screen.
  • Page 171 If the card is not detected again, it may be defective. Note: Use only accessories that are recommended by Garmin expressly for your navigation system. Garmin Würzburg GmbH accepts no liability for errors or damages resulting from the use of other accessories.

  • Page 172: Index

    User’s manual SEAT Portable System Index Current position Save ..........94 Activate .......... 147 Data entry ......... 29 Destination Block .......... 94, 96 Direct access ........ 42 Bluetooth Enter coordinates ......37 Activate ........147 Favourites ........44 Connect ........145 From map ........
  • Page 173 User’s manual SEAT Portable System EV interface Handsfree module e-manager ........123 Symbols ........26 Energy recovery ......128 Text inbox ........154 Power flow ......... 121 Use handsfree ......153 Use mobile phone ....... 154 Voice command ......150 Home address Edit ..........
  • Page 174 User’s manual SEAT Portable System Navigation system Reality View ......... 69 Description ........11 Standard ........62 Energy .......... 15 Track ..........72 Installation ........13 Vehicle ......... 66 Memory card ......... 15 Media No TMC ........15 Media Player ......132 Scope of delivery ......
  • Page 175 User’s manual SEAT Portable System Picture viewer ......... 138 Routes and tracks Pictures .......... 138 Load ..........55 Planning........52 Direct access ....... 42 Routes and tracks ......52 in a city ......... 41 RPM gauge ........113 Nationwide ........40 Nearby .........
  • Page 176 User’s manual SEAT Portable System Take me home ......46, 50 Unblock ..........95 Technical data ........ 165 Use voice command ......30 Text inbox ........154 Preview TMC ......106 Recalculate route ....... 110 Voice command ....30, 35, 150 Show ..........

Table of Contents