Garmin SEAT Portable System User Manual page 61

Save as favourite: Saves the selected destination to the F
"Saving destinations" on page 49).
Save destination: Saves the selected address in the F
"Saving destinations" on page 49).
Save Position: Opens the S
your current position under a certain name in the F
Save route: Opens a window in which you can save the planned route under a
specific name (see "Saving routes" page 54).
Saved routes and tracks: Opens a window in which you can load a saved route
or a track.
Settings: Opens the S
system (see "Configuring the navigation system" on page 163).
Show map: Opens the map in Standard mode (see "Map in Standard mode" on
page 62).
Show on map: Shows the selected address on the map.
Sightseeing tours: Opens the S
a sightseeing tour and start the navigation on a tour (see "Sightseeing
tours" page 92).
Simulation: Simulates a navigation on the route indicated. This simulation can
be performed without GPS reception. On multi-leg routes, only the first
leg is simulated.
Skip current destination: Tap on this button to omit the next route point. This
button is active only when at least 2 route points still lie ahead of you
(see "Tracks and multi-leg routes" on page 52).
Start recording, Stop recording: Starts or ends the recording of a track (see
"Tracks" on page 84).
Traffic: Opens the T
listed (see "TMC (Traffic information)" on page 105).
Turn-by-Turn list: Shows detailed directions for the route, including all points at
which you must turn (see "Turn-by-Turn list" page 95).
Options, more functions
AVE DESTINATION AS
window. Here you can configure the navigation
ETTINGS
IGHTSEEING TOURS
RAFFIC INFORMATION
User's manual SEAT Portable System
AVOURITES
AVOURITES
window. Here you can save
AVOURITES
window. There you can select
window in which pending reports are
list (see
list (see
list.
- 61 -