Garmin SEAT Portable System User Manual page 125

►
5. Tap on Save to save the settings for the charging location.
The C
be shown in the list.
6. Tap on Back to open the
Defining the departure times
You can define 3 departure times for charging and air conditioning
operations. You can assign a charging location to each departure time.
You can also define whether it is a serial date.
1. In the
the departure time which you want to edit.
The D
2. Use the
which you want the charging or air conditioning operation to be
finished.
3. Set the week-day by tapping on the corresponding button.
4. If you want to define the entered date as a serial date, e.g. 'every
Monday at 7:30h', activate the
edge of the screen. You can also select several week-days, e.g. in
order to set a date for 'every Saturday and Sunday at 9:00h'.
5. If required, assign a different charging location to the departure time
(see the following section).
Assigning a charging location
A certain charging location is assigned to each departure time. You
can change this assignment.
1. In the
the departure time to which you want to assign a charging location.
The D
2. Tap on the
assign a different location.
The C
Car info
Night current: Activate the checkbox
if a cheaper off-peak rate is available. Then tap on the setting
and use the
when your off-peak rate begins and ends. The battery will then
be charged preferably during this period.
HARGING STATIONS
-
window tap on the
E MANAGER
window opens.
EPARTURE TIME
(Up) and
- window tap on the
E MANAGER
window opens.
EPARTURE TIME
(Assign charging station) button if you want to
HARGING STATIONS
User's manual SEAT Portable System
(Up) and (Down) buttons to set
list opens. The new charging location will
- window.
E MANAGER
(Edit) button to the right of
(Down) buttons to set the time at
(Repeat) button at the top right
(Edit) button to the right of
list opens.
alongside this setting
- 125 -