Garmin SEAT Portable System User Manual page 23

GPS
The GPS symbol can show the following GPS reception states:
No GPS (No symbol): The built-in GPS receiver is not operational.
Contact us if the problem persists (see "Questions about the product"
on page 10).
No signal: Data is being received from less than three satellites.
Position cannot be calculated.
GPS ready: Data is being received from at least 3 satellites. Position
can be calculated.
For details of the GPS status refer to chapter "GPS status, saving the
current location" on page 94.
Track
The
at this moment.
For more information about tracks refer to chapter "Tracks" on page 84.
Compass
The Compass symbol is available only in the map view. It shows you in
which direction you are currently moving. It can indicate the following
points of the compass: N, NE, E, SE, S, SW, W, NW.
Showing and hiding the Compass symbol
You can activate and deactivate the Compass symbol so that it is
shown or hidden.
In the N
►
Navigation.
Scroll with the
►
until you see the Display compass setting.
The currently valid setting value is highlighted (red).
Tap on the
►
values.
Tap on OK.
►
Operating the navigation system
(Record track) symbol indicates that a track is being recorded
window tap on More functions > Settings >
AVIGATION
(To the left) and
(Toggle) button to alternate between the setting
User's manual SEAT Portable System
(To the right) buttons
- 23 -