Renault velSatis Driver's Handbook Manual page 95

STARTING AND STOPPING THE ENGINE USING THE REMOTE CONTROL CARD
1
When the door is opened, the
RENAULT Card reader 2 lights up.
The message "Insert card" appears
on the instrument
information display.
Insert the RENAULT card in the
card reader 2 which has two
notches: the first is the accessories
position and the second is the
starting the engine position.
A
Accessories position
(First notch)
The accessories (radio, etc.) operate
when the engine is not running.
panel
2
Starting the engine position
(Second notch)
Once the RENAULT Card is fully
inserted into the card reader 2
(when you hear the unlocking noise
from the steering column), button 1
lights up to confirm authorisation to
start the engine: press button 1
briefly to start. The warning light A
comes on to confirm that the engine
is running.
Note: the light on button 1 is out if
you are not in a position to start (for
example: diesel preheating, gear
selected, etc. are not correct).
Special circumstances
In some cases, (for example, wheels
jammed against the pavement), it
will be necessary to manoeuvre the
steering wheel, whilst pressing on
button 1 to unlock the steering
column.
Starting the engine position
(continued)
As soon as the engine starts, button
1 goes out and the engine running
indicator light A lights up.
2.03