Table of Contents
Advertisement
PARKING PROXIMITY SENSOR
1
Manual activation/deactivation
of the front and rear parking
proximity sensor
You can deactivate the system
permanently by pressing the switch
1
and
holding
it
approximately three seconds
The warning light in the switch
stays on and the Parking Proximity
Sensor
Deactivated
appears on the instrument panel for
approximately 10 seconds.
(continued)
In this case you can reactivate the
system by pressing switch 1 for
longer than three seconds: the
warning light in the switch goes out
and the Parking Proximity Sensor
Activated
displayed on the instrument panel
for approximately 10 seconds.
down
for
message
When the vehicle is being driven
at
a
(12 km/h), certain noises (motor
cycle, lorry, pneumatic drill,
etc.) may trigger the beeping
sound.
message
will
be
speed below 7 mph
Automatic activation/
deactivation of the system
The system is activated when the
vehicle is being driven at a speed
below
7
mph
(12
approximately.
The system deactivates:
- when the parking brake is applied;
- when the vehicle speed is above
7 mph (12 km/h);
- when the vehicle is stationary for
more
than
five
approximately (such as when in a
traffic jam or waiting at red lights,
etc.);
- when the vehicle is in neutral or
when the gear lever has been
shifted to N or P for automatic
gearboxes;
- if a caravan or trailer is fitted with
a detection system.
km/h)
seconds
2.39
Advertisement
Chapters
Table of Contents
