Fujitsu fi-7160 Getting Started Manual page 6

3.
Connect the AC cable to the AC adapter
(hereinafter called the "power cable").
WARNING
Only use the supplied power cable.
To prevent electrical shock or scanner
malfunction, do not perform the following:
Use a different power cable
Use the supplied power cable for other
devices
4.
Connect the power cable to the power
connector of the scanner and the power
outlet.
HINT
When you plug the cable into the outlet, the
[Power] button on the scanner's operator
panel will flash once. Note that this is an
initial diagnosis and not a malfunction.
Test-Scan
Follow the procedure described below to check
that documents can be scanned correctly by using
PaperStream Capture and the PaperStream IP
(TWAIN) driver.
1.
Press the [Power] button on the operator
panel.
The scanner is turned on, and the [Power]
button lights in green.
During initialization, the following image is
displayed on the LCD of the operator
panel.
The scanner is ready to scan when
[Ready] is displayed.
ATTENTION
If [Ready] is not displayed on the LCD,
refer to "Chapter 8 Troubleshooting" in the
Operator's Guide.
2.
3.
4.
LCD
LED indicator
[Power]
button
6
Select the language to be displayed on the
LCD.
For details, refer to "Chapter 4 How to Use
the Operator Panel" in the Operator's Guide.
Turn on the computer.
The scanner is automatically detected.
ATTENTION
If the [Found New Hardware] dialog box
appears, select [Locate and install driver
software (recommended)], and follow the
instructions on the screen to install the
driver.
Load a document in the scanner.
1. Pull out the chute extensions according to the
length of the document.
2. Pull the stacker out, slide stacker extension 1
and stacker extension 2 toward you
according to the length of the document, and
lift the stopper up.
3. Load the document face-down in the ADF
paper chute (Feeder).
4. Adjust the side guides to the width of the
document.
fi-7160/fi-7180
Side guides
Stopper
fi-7260/fi-7280
Chute extension 2
Chute extension 1
Side guides
Stopper
Chute
extension 2
Chute
extension 1
Stacker
Stacker extension 1
Stacker extension 2
Stacker