Base Models - HP Integrity BL870C i2 Specifications

QuickSpecs
Models

Base Models

HP Integrity BL870c i2
Base Unit for c7000
Enclosure
AH383A
HP Integrity BL870c i2
Base Unit for c3000
Enclosure
AM329A
Processor(s)
Supports up to four (4)
processors
Cache Memory
All processor models
Memory
Network Adapter
Storage Controller
Hard Drives
IO expansion
Optical Drive
Integrity iLO 3
Form Factor
DA - 13620 Worldwide — Version 18 — December 10, 2013
Four (4) processor sockets; processor modules are configured to order.
Included with processors.
Forty eight (48) DIMM sockets; memory DIMMs are configured to order.
Eight (8) NIC ports via (4) NC532i Dual Port Flex-1010GbE Multifunction Server
Adapter
NOTE: Flex-10 capability requires OS drivers and the use of an HP Virtual
Connect Flex-10 10GbE Ethernet module. Learn more at
http://www.hp.com/go/virtualconnect
NOTE: BL8x0c i2 server blades require Virtual Connect 3.00 or later when used
in Virtual Connect configurations
NOTE: Each part is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP
BladeSystem c-Class interconnect components.
One (1) additional 10/100 NIC dedicated to Integrity iLO 3 Management
Integrated HP Smart Array p410i SAS Controller
Four SFF SAS drive bays; hard disk drives are configured to order.
Six PCIe mezzanine card slots (PCIe Gen2 x8 interface); mezzanine card are
configured to order
None internal to blade server
Integrity iLO 3 Advance Pack license included
Supports up to 2 BL870c i2 in HP BladeSystem c3000 Enclosure
Supports up to 4 BL870c i2 in HP BladeSystem c7000 Enclosure
HP Integrity BL870c i2 Server Blade
Page 24