Epson PowerLite Home Cinema 2000 Quick Setup Manual

PowerLite Home Cinema 2000/2030
®

Quick Setup

Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. For additional connection types,
see the online User's Guide.

Video device

Connect up to 4 video devices and use the Source button on the projector or
one of the source buttons on the remote control to switch between them.
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the HDMI 1 MHL port.
Devices that support an MHL connection include the Samsung™ Galaxy Note
II™ and the Roku Streaming Stick™. Some devices may require an adapter or
®
may not require an MHL cable. Not all features or functions may be supported.
Check your device's documentation for more information.
Computer
Connect one end of an HDMI cable to one of the projector's HDMI ports and
the other end to an HDMI port on your computer.
Note: For information on connecting the projector to your computer or other
devices (camera, USB flash drive, etc.), see the online User's Guide.
Connect audio
Note: If the projector is connected using an HDMI connection, you may need
to reduce the projector speaker volume to zero (0), or make sure that the
correct audio output is selected on your device.
Built-in speaker
The projector has a built-in speaker that can play audio from a connected
video source (DVD player, streaming device, etc.) using an HDMI cable. If you
do not use an HDMI connection, you must connect your device's audio output
to the projector's audio input.
*412537900*
*412537900*
HDMI cable
RCA video cable
(composite video)
Component video
to VGA cable
MHL cable
HDMI cable
Audio cable
Audio Out port
If you have connected an HDMI video source, you can connect the projector
to a set of external speakers or headphones through the Audio Out port. The
connected device must be set to PCM output.
External speakers
Connect your device's audio output to your home theater receiver or powered
speakers.
Home theater system
Video source
Surround sound
Powered speakers
External speakers Video source
Note: See your home theater receiver documentation for more information
on connections.
Turn on your equipment
1
Turn on your video source.
2
Plug in the projector. The
3
Open the A/V Mute slide all the way.
4
Press the power button on the projector or remote control. The
projector beeps, the status light flashes blue, and then stays on.
Note: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
3.5 mm stereo
mini cable
Video cable
Receiver Projector
Video cable
Projector
power light on the projector turns blue.
power button twice, then