The Configuration Screen - ZyXEL Communications B-220 User Manual

LABEL
Current Transfer This field displays the current transmission rate of the ZyAIR in megabits per second.
Rate
Current Service This field displays the name that identifies your ZyAIR in the wireless LAN network.
Set Identifier
NIC MAC This field displays the MAC address of the ZyAIR.
Address
Tx/Rx Frame
Transmitted This field displays the number of data frames transmitted.
Received This field displays the number of data frames received.
Link Quality This is applicable when the ZyAIR is in wireless station mode.
The status bar and the percentage number show the quality of the signal.
Link Strength This is applicable when the ZyAIR is in wireless station mode.
The status bar and the percentage number or a number in dBm (decibel relative units
compared to milliwatts) show the strength of the signal.
Percent/dBm This is applicable when the ZyAIR is in wireless station mode.
Click this button to display either percentages in the Link Quality and Link Strength
fields or a number of dBm in the Link Strength field.
OK Click OK to save all changes and close the ZyAIR Utility.
Cancel Click Cancel to discard changes and close the ZyAIR Utility.
Help Click Help to display on-line help window.
4.3

The Configuration Screen

Click Configuration to display the screen as shown.
Access Point Mode Configuration
Table 4-1 Access Point Mode: Link Info
DESCRIPTION
ZyAIR Wireless LAN Utility
4-3