3.4.1 Connecting To A Network; Figure 3-4 Station Mode: Site Survey Warning; Table 3-4 Color Indicator For Link Quality/Link Strength - ZyXEL Communications B-220 User Manual

ZyAIR Wireless LAN Utility
LABEL
WEP This field shows whether WEP data encryption is activated (Enable) or inactive (Disable).
Search Click Search to scan for available wireless device within transmission range.
Connect Click Connect to associate to the selected wireless device.
OK Click OK to save all changes and closes the ZyAIR Utility.
Cancel Click Cancel to discard changes and close the ZyAIR Utility.
Help Click Help to display the on-line help window.
The following table describes the colors used for the entries in the Site Survey screen.

Table 3-4 Color Indicator for Link Quality/Link Strength

COLOR
Green
Blue
Red

3.4.1 Connecting to a Network

Follow the steps below to connect to a network.
Step 1.
Click Search to scan for all available wireless networks within range.
Step 2.
To join a network, either click an entry in the table to select a wireless network and then click
Connect or double-click an entry.
Step 3. If the WEP field displays Enable for the selected wireless network, the following screen
displays.
Step 4. Click OK to display the Security screen and refer to Section 3.5 to set up WEP keys. Otherwise
click Cancel and connect to another wireless network without WEP encryption.
3-6
Table 3-3 Station Mode: Site Survey
Excellent link quality or link strength.
Good link quality or link strength.
Poor link quality or link strength.

Figure 3-4 Station Mode: Site Survey Warning

DESCRIPTION
DESCRIPTION
Wireless Station Mode Configuration