Table of Contents
Advertisement
The Printer Function
Error & Status Messages on the Display
This section describes the principal messages that appear on the display. If a
message not described here appears, act according to the message.
Reference
Before turning the main power off, see 'Turning On the Power', Copy Refer-
ence.
❖ Status messages
Message
Offline
Please wait.
Printing...
Ready
Resetting Job...
Setting change...
Waiting...
❖ Alert messages
Messages/Second messages
Change Tray # to the follow-
ing settings:
xxx yyy
Collate cancelled.
5. Troubleshooting
The machine is offline. To start printing, switch the machine
online by pressing {Online} on the control panel.
Wait a while.
The machine is printing. Wait a while.
The machine is ready for use. No action is required.
The machine is resetting the print job. Wait until "Ready" ap-
pears on the display.
The machine settings are being changed. Wait a while.
The machine is waiting for the next data to print. Wait a while.
Causes
The settings of the selected pa-
per tray are different from
those specified for printing.
# indicates the tray number.
xxx indicates the tray number.
yyy indicates the paper size.
The collate print function has
been canceled.
Status
Solutions
Press [JobReset] to change the
paper tray settings, or press
[FormFeed] to print regardless.
For details about the paper
tray settings, see General Set-
tings Guide.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
33
Advertisement
Table of Contents
