Create Raid - Foxconn Z68A-S Series User Manual

Create RAID 1

1. Select "1.Create RAID Volume" from the main menu and press <Enter>.
2. In "Name" item, you can input a device name for the RAID1 system and press
<Enter> to apply it. Here, we name it as TryRAID1 to replace the default Volume0.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
3. In "RAID Level" item, you can use Up or Down arrow key to make a selection.
Select RAID1 (Mirror) and press <Enter>.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]-Change [TAB]-Next
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
RAID1: Mirrors data (redundancy).
[↑↓]-Change [TAB]-Next
]
Volume0
TryRAID1
RAID0(Stripe)
Select Disks
128KB
0.0 GB
N/A
Create Volume
[ HELP ]
[ESC]-Previous Menu
]
TryRAID1
RAID1(Mirror)
RAID1(Mirror)
Select Disks
N/A
0.0 GB
N/A
Create Volume
[ HELP ]
[ESC]-Previous Menu
84
[ENTER]-Select
[ENTER]-Select