Foxconn Z68A-S Series User Manual page 22

!
We recommend you using an 8-pin ATX 12V power supply. If
you are using a 4-pin power supply, you need to align the ATX
power connector according to the picture on the right.
USb Connectors : f_USb1/2/3/4
In addition to the USB 2.0 ports on the rear panel,
this product also provides 10-pin USB headers on
its motherboard. By connecting through USB cables
with them, user can quickly expand another eight
USB ports on the front panel.
EMPTY
Serial ATA Connectors : SATA_1/2/3/4/5
The Serial ATA connector is used to connect with
SATA Hard Disk or CD devices which support this
feature. The SATA_3/4/5 allows up to 300MB/s
data transfer rate, the SATA_1/2 support SATA
3.0 specification, and allows up to 600MB/s data
transfer rate.
Speaker Connector : SPeAKeR
The speaker connector is used to connect speaker
of the chassis.
1 2
VCC VCC
D-
D-
D+ D+
GND
GND
GND
9 10
F_USB 1/2/3/4
1
SATA_3/4/5
EMPTY
SPEAKER
15
15
Connect a 4-pin
power plug
1
GND
GND
TX+
TX+
TX-
TX-
GND
GND
RX-
RX-
RX+
RX+
GND
GND
SATA_1/2
1
PWR
2
NC
3
SPKJ
4