Foxconn H77MXV Series User Manual page 87

RAID CONFIGURATION
Create RAID 10 (0+1)
1. Select "1.Create RAID Volume" from the main menu and press <Enter>.
2. In "Name" item, you can input a device name for the RAID10 system and press <Enter> to
apply it. Here, we name it as TryRAID10 to replace the default Volume0.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
3. In "RAID Level" item, you can use Up or Down arrow key to make a selection. Select
RAID10(RAID0+1) and press <Enter>.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
4. After exiting from "RAID Level", it goes directly to "Stripe Size" item. Because all four disks
are elected for RAID10, so there is no need to go to Disks option.
80
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5 Intel(R) Rapid Storage Technology - Uption ROM - 11.0.8.1204
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Enter a unique volume name that has no special characters and is
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5 Intel(R) Rapid Storage Technology - Uption ROM - 11.0.8.1204
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
RAID 10: Mirrors data and stripes the mirror.
]
Volume0
TryRAID10
RAID0(Stripe)
Select Disks
128KB
0.0 GB
N/A
Create Volume
[ HELP ]
16 characters or less.
]
TryRAID10
RAID0(Stripe)
RAID10(RAID0+1)
Select Disks
64KB
149.1 GB
N/A
Create Volume
[ HELP ]