Main - Foxconn H77MXV Series User Manual

BIOS SETUP

Main

Main F-Center
Main
System Date
System Time
Access Level
Model Name
ME Version
BIOS Version
Build Date and Time
Halt On
CPU Brand Name:
Genuine Intel(R) CPU 0 @ 1.80GHz
Total Memory
MAC Address
► System Date
<weekday><month><date> <year> format. Day—weekday from Sun. to Sat., this message
is automatically displayed by BIOS (Read Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► System Time
This item allows you to configure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to
select a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► Access Level
It displays your current access level. If you enter system with a user password, it will dispaly
"User". If no password is set or you enter system with administrator password, this item will
dispaly "Administrator".
► Model Name
This item shows the model name of this product.
► ME Version
It displays the current ME version.
► BIOS Version
It displays the current BIOS version. User can check this information and discuss with the
field service people if a BIOS upgrade is needed.
► Build Date and Time
This item shows the BIOS building date and time.
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors]: All errors can result in system halt.
[No Errors]: No error can result in system halt.
22
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced Boot Power Health
[Tue 10/28/2011]
[09:44:21]
Administrator
H77MXV/H77MXV-D
N/A
BB4F1A01
01/04/2012 14:27:07
[All, but keyboard]
1024 MB (DDR3 1333)
00-00-00-00-00-03
Version 2.12.1219. Copyright (C) 2011 American Megatrends, Inc.
Security Save & Exit
Set the Date. Use Tab to
switch between Date elements.
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit