Bios Configuration; Create Raid In Bios; Enter Raid Bios Setup - Foxconn H77MXV Series User Manual

8. Format finished. Click "OK" to continue
copying of RAID driver into this diskette.
9. Check if the diskette contains the driver files.
Later, when in the process of installing
Windows XP in your RAID system, it will ask
you to use this floppy diskette to provide
driver for additional specific devices, for
example, a RAID device.
10. Install Serial ATA Hard Disks :
10-1. Shut down your computer.
10-2. Install SATA hard disks into the drive bays, connect all power and SATA cables.

5-5 BIOS Configuration

1. Enter the BIOS setup by pressing <DEL> key during the POST(Power On Self Test).
2. Set the "SATA Mode" to "RAID Mode". (Please refer to Chapter 3 BIOS Setup)
3. Press <F4> to save the setting then PC will reboot itself.

5-6 Create RAID in bIOS

1. enter RAID bIOS Setup

When BIOS is restarted, it will display a message asking you to press <Ctrl>+<I> keys simul-
taneously to enter the main menu of Intel® Rapid Storage Technology enterprise Option ROM
Utility. Press the <Ctrl>+<I> to enter Configuration Utility.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R w6AID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
1 . Create RAID Volume 4. Recover Volume Options
2. Delete RAID Volume
3. Reset Disks to Non-RAID
RAID Volume :
None Defined.
Physical Devices:
ID Device Model
0 ST3320418AS
1 ST3160815AS
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
Intel(R) Rapid Storage Technology - Uption ROM - 11.0.8.1204
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[
[ DISK/VOLUME INFORMATION
Serial #
9VM8Y4D8
5RX4M04N
MAIN MENU ]
5. Acceleration Options
6. Exit
]
Size Type/Status(Vol ID)
298.0GB Non-RAID Disk
149.0GB Non-RAID Disk
RAID CONFIGURATION
69