Delay Start Button - AEG L 6060 TL 1 User Manual

www.aeg.com
8
The display shows:
A • The programme time
• The delay start
• Alarm codes
• Err
•
B
C
5.4 Start/Pause button
Press button
programme.

5.5 Delay start button

Press button
programme from 30 minutes to 20 hours.
5.6 Time save button
Press the button
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
When the programme starts, the time decreases with steps of 1 mi-
nute.
When you press the delay start button, the display shows the delay
start time.
If the appliance has a malfunction, the display shows alarm codes. Re-
fer to 'Troubleshooting' chapter.
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button
When the programme is completed.
Door lock
You cannot open the appliance door when the symbol is
on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• There is water in the drum.
• The 'Rinse Hold' function is on.
The child lock symbol
The symbol comes on when you activate this device.
4 to start or interrupt a
to delay the start of a
5
to decrease the
6
4 5.7 Liquid detergent button
Press button
use a liquid detergent.
5 5.8 Spin button
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
• Activate the 'Rinse Hold' function. Set
6
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
flashes.
4
7 to adapt the cycle if you
8
'Rinse Hold' function is
on.
7