AEG L 6060 TL 1 User Manual
Hide thumbs Also See for L 6060 TL 1:

Advertisement

EN User manual
L 60060 TL 1
L 60260 TL 1

Advertisement

Table of Contents
loading

Summary of Contents for AEG L 6060 TL 1

  • Page 1 EN User manual L 60060 TL 1 L 60260 TL 1...
  • Page 2: Table Of Contents

    13. TECHNICAL INFORMATION ..........23 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –...
  • Page 3: Safety Information

    ENGLISH 1. SAFETY INFORMATION Before the installation and use of the appliance, careful- ly read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use cau- ses injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
  • Page 4: Safety Instructions

    • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly quali- fied persons in order to avoid a hazard. • The operating water pressure (minimum and maxi- mum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa) •...
  • Page 5: Water Connection

    ENGLISH Water connection ance. Contact the Service to ensure which accessories can be used. • Make sure not to cause damage to the water hoses. 2.3 Care and Cleaning • The appliance is to be connected to WARNING! the water mains using the new sup- Risk of injury or damage to the plied hose-sets.
  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Control panel Rating plate Mains cable Lid handle Water inlet valve Filter access door Water drain hose Lever to move the appliance Transit bolts Adjustable feet Feet for the appliance level 4. ACCESSORIES Plastic cap To close the hole on the rear side of the cabinet, after the removal of the transit bolt.
  • Page 7: Control Panel

    ENGLISH 5. CONTROL PANEL On/Off button The AUTO Stand-by function automati- cally deactivates the appliance to de- Programme knob crease the energy consumption when: Display • You do not use the appliance for 5 mi- nutes before you press button Start/Pause button –...
  • Page 8: Delay Start Button

    The display shows: • The programme time When the programme starts, the time decreases with steps of 1 mi- nute. • The delay start When you press the delay start button, the display shows the delay start time. • Alarm codes If the appliance has a malfunction, the display shows alarm codes.
  • Page 9: Washing Programmes

    ENGLISH • After you press the Start/Pause button 5.9 Temperature button , all the buttons and the pro- gramme knob are deactivated. Press button to change the default temperature. 5.11 Permanent extra rinse 5.10 Child lock function function This function prevents children to play With this function you can keep the extra with the control panel.
  • Page 10 10 www.aeg.com Programme Type of load Cycle Functions Temperature max. weight of load description Synthetic or mixed Wash SPIN REDUC- fabric items with nor- Rinses TION Synthetics mal level of soil. Short spin RINSE HOLD 60° - Cold max. 2,5 kg...
  • Page 11 ENGLISH Programme Type of load Cycle Functions Temperature max. weight of load description Set this programme Prewash SPIN REDUC- to wash curtains. It Wash TION Curtains adds automatically Rinses RINSE HOLD 40° - Cold the prewash phase to Short spin LIQUID DETER- clean the dust from GENT...
  • Page 12: Consumption Values

    12 www.aeg.com 6.1 Woolmark Certificate pany for the washing of machine washa- ble Woolmark product provided that the garments are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M1027...
  • Page 13: Before First Use

    ENGLISH Off Mode (W) Left On Mode (W) 0.48 0.48 The information given in the charts above are in compliance with the EU Com- mission regulation 1015/2010 implementing directive 2009/125/EC. 8. BEFORE FIRST USE Put a small quantity of detergent in the perature without laundry.
  • Page 14 14 www.aeg.com 9.2 Using detergent and additives • Measure out the detergent and the fabric conditioner. Detergent compartment for prewash phase. The marks MAX are the maximum levels for the quantity of de- tergent (powder or liquid). Detergent compartment for washing phase.
  • Page 15 ENGLISH CLICK • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid then the maximum level. 9.3 Setting and starting a 9.5 Cancel a programme programme...
  • Page 16: Open The Lid

    16 www.aeg.com • In the display Before you press button comes on. start the appliance, you can can- • The indicator of the Start/Pause but- cel or change the set of the delay goes off. start. • You can open the lid 2 minutes after the appliance stops.
  • Page 17: Helpful Hints And Tips

    ENGLISH 10. HELPFUL HINTS AND TIPS 10.1 The laundry load • Do not mix different types of deter- gents. • Divide the laundry in: white, coloured, • To help the environment, do not use synthetics, delicates and wool. more than the correct quantity of de- •...
  • Page 18: Care And Cleaning

    18 www.aeg.com • mmol/l (millimol for each litre - inter- • Clarke degrees. national unit for the hardness of wa- ter). Water hardness table Water hardness Level Type °dH °T.H. mmol/l Clarke soft 0-15 0-1.5 medium 8-14 16-25 1.6-2.5 10-16...
  • Page 19: Drain Filter

    ENGLISH Remove the detergent dispenser and disconnect the two parts. Clean all the parts with water. Assemble the two parts of the deter- gent dispenser. Put back the detergent dispenser. WARNING! 11.5 Drain filter • Disconnect the mains plug Regularly examine the drain filter from the mains socket.
  • Page 20: Emergency Drain

    20 www.aeg.com To clean the water inlet filters: Close the water tap. Remove the water inlet hose from the water tap. Clean the filter in the inlet hose with a stiff brush. Remove the inlet hose behind the appliance. Clean the filter in the valve with a stiff brush or a towel.
  • Page 21: Troubleshooting

    ENGLISH WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsi- ble for damages caused by low temperatures. 12. TROUBLESHOOTING The start of the appliance does not oc- •...
  • Page 22 22 www.aeg.com Problem Possible cause Possible solution A washing programme Set the drain programme. without the drain phase is set. The function Rinse & Set the drain programme. Hold is on. The appliance Close the door correctly. door is open or not closed cor- rectly.
  • Page 23: Technical Information

    ENGLISH Problem Possible cause Possible solution The appliance Incorrect level of the ap- Adjust the level of the appli- makes an unusual pliance. ance. Refer to 'Installation'. noise. You did not remove the Remove the packaging and/or packaging and/or the the transit bolts.
  • Page 24: Environment Concerns

    24 www.aeg.com Spin speed Maximum 1000 rpm (L60060TL1) 1200 rpm (L60260TL1) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 14. ENVIRONMENT CONCERNS Recycle the materials with the appliances. Do not dispose symbol . Put the packaging in appliances marked with the symbol applicable containers to recycle it.
  • Page 25 ENGLISH...
  • Page 26 26 www.aeg.com...
  • Page 27 ENGLISH...
  • Page 28 www.aeg.com/shop...

This manual is also suitable for:

L 60260 tl 1

Table of Contents