Table of Contents
Advertisement
Recording a Program
Recording While You're Away (Timer Recording)
The VCR Plus+ and timer program features let you program the VCR to record up to eight
different programs within a one year period. Before setting the timer, make sure that:
¥ The clock is set correctly.
¥ A tape with safety tab has been inserted with enough tape to record the program(s).
¥ If you receive all channels through a cable box, select a cable box viewing channel
on page 26.
Setting a Timer Recording
10. If using a cable box, leave it turned on and tuned to
Stopping a Recording in Progress
With the VCR: Press POWER and then STOP within a few
seconds.
With the Remote: Press VCR1 (VCR2) and then STOP
within a few seconds.
1. Press MENU on the remote to display the VCR MAIN
MENU.
2. Press 2 to display the TIMER RECORDINGS menu.
3. Press 1 to display the Create a New Program menu.
4. Press 1, 2, 3, or 4 to select type of program.
1 One time Ñ single program recorded once.
2 Daily Ñ program recorded at same time every day.
3 Weekdays Ñ program recorded at same
time Monday through Friday.
4 Weekly Ñ program recorded at same time
once a week.
5. Press number buttons on the remote to enter the channel
number (or INPUT to select the line input), start time
including AM or PM, end time, and start date of the
recording. Just follow the on-screen prompts.
Press CLEAR to correct an entry.
If you receive all channels from a cable box and have
completed Cable Box Setup on the next page, the output
channel of your cable box will automatically appear on
the menu.
6. Select recording speed using SPEED or the number
buttons on the remote.
7. Press MENU to enter your program. A reminder
appears which will time out.
PROGRAMS OVERLAP may appear on the screen if you
entered two programs where the times overlap.
8. The TIMER RECORDINGS menu appears. Press 1 to
enter an additional timer program, or press 0 to exit.
Turn off the VCR
9.
before recording begins.
TIMER appears briefly and
display panel when the timer has been programmed.
the channel you want to record.
appears in the VCRÕs
TIMER
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
TIMER RECORDINGS
1 Create a New Program
How often should this
Program record?
1 One time
2 Daily (every day)
3 Weekdays (M - F)
4 Weekly (once per week)
Program 1 (One Time)
Channel
--
Program 1 (One Time)
Channel
08
Start Time
--:-- --
Program 1 (One Time)
Channel
08
Start Time 02:10 AM 1=AM
End Time
--:--
Program 1 (One Time)
Channel
08
CABLE
Start Time
02:10 PM
End Time
03:35 PM
Start Date
08/04/96 Sun
Tape Speed
SLP
1=SP 2=SLP
Press CLEAR to correct
Press MENU to save
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
2=PM
25
Advertisement
Table of Contents
